Series:Advances in Physics Research
Proceedings of the 2015 International Conference on Material Science and Applications
724 authors
- Guo, Hong
- Study on the Properties of Nano-Al2O3/Phenyl Silicone Rubber Composites
- Guo, Hong-Bao
- Calculation on Tensile Strength of Notched 2D Woven C/SiC Composite Laminates-Considering the Nonuniformity of Material
- Guo, Jin-Long
- Simulation Study of Phase Demodulation in Resonance Band for Gear Tooth Cracking Fault Detection
- Guo, Pei-Tao
- Effects of Dimethyl Formamide on Laser-induced Damage to SiO2 Films Prepared by the Sol-gel Method
- Guo, Pei-Tao
- The Micro-mechanical Property of Porous Alumina Film on Glass Substrate Prepared by Oxalic Acid Oxidation
- Guo, Wei-Gang
- Lubrication Simulation and Solution of Oil Film Force and the Equilibrium Position of Three-lobe Journal Bearing
- Guo, Yu
- Simulation Study of Phase Demodulation in Resonance Band for Gear Tooth Cracking Fault Detection
- Hamzah, Mohammad Amir
- Conventional and Single-step Pretreatment Process of Cotton Woven Fabric
- Han, Ji-Wei
- Microstructures of Surface Alloyed High Manganese Cast Steels
- Han, Jia-Qiang
- The Research on the Microstructure and Electrical Properties of Nb2O5 Doped PBSFCZT Ceramics
- Han, Jian-You
- Design and Analysis of Mechanism Based on Topological Theory
- Han, Jian-You
- Decoupling Analysis of Input Parameters of Cubic Mechanism
- Han, Lei
- Electromagnetic Simulation of Metallic Pipeline for Non-destructive Testing
- Han, Peng-Biao
- Study on Impact Parameter of the Hole Generatrix through a Center Hole Conical Part Cold Extrusion
- Hao, Jun-Ke
- Automotive Sheet Metal SAPH440 and Q235 Formability of Comparative Study
- Hao, Zhi-Ming
- Numerical Simulation on Impacting Experiments of the Projectile Recovery System
- He, Bing
- The X-ray Powder Diffraction Data for Al8GdNi4 Compound
- He, Geng-Huang
- Research on the High-Temperature Strength of Heavy Drilling Tool in the Rough Machining Process
- He, Jin-Tai
- Development of Novel Inorganic Antibacterial Material
- He, Liu-Cheng
- Preparation of Polyimide Films Derived from a Novel Precursor Pre-imidized Poly (amic acid) Ammonium Salt
- He, Sheng-Dong
- Experimental Study on Compressive Strength of Manufactured Sand Concrete
- He, Yu-Huai
- Failure Analysis of Stainless Steel Bolt
- Heng, Xin
- Study on Histocompatibility and Biodegradability of Polylactic Acid Gel in Rats
- Hoshi, Yoichi
- Low-Resistivity Indium-Tin-Oxide Transparent Conducting Films: Dependence of Carrier Electron Concentration on Tin Concentration
- Hou, Jun-Ming
- Cutting Force Investigation when Heavy Milling Welded Aluminum-Thin- Walled Hollow Structure
- Hou, Yun-Fen
- The Effect of Iron Tailing Powder on the Cement Mortar Strength
- Hu, Chao-Hao
- Synthesis and Photocatalytic Activity of M–doped CaBiO2Cl (M = Ag, Co, and Ni) under Visible Light
- Hu, Chun-Yan
- Failure Analysis of Stainless Steel Bolt
- Hu, Dan
- Infrared Sights Zero Momentum Measurement Technology based on Camera Adaptive Algorithm
- Hu, Gui-Bin
- The Long Correlation Option Pricing based on Binary Tree Model
- Hu, Henry
- Corrosion of Permanent Mold Cast Magnesium Alloy AJ62 in Automotive Environments
- Hu, Jie
- Diffusion Bonding of Magnesium Alloy (AZ31B) to Cu by Using Sn Foil Interlayer
- Hu, Jin-Hua
- Multidirectional Forging Simulation Research on a Tee Joint Valve
- Hu, Jing
- Talking about the Responsibility of Media in Guiding Public Opinion under the Network Environment
- Hu, Sheng-Lai
- Research on the Key Technologies of a New CNC Turret Vertical Drilling and Milling Machine
- Hu, Shun-Min
- The Influence of Environment Temperature on the Degradation of Lead Zirconate Titanate Ceramic
- Hu, Yu-Mei
- Parameters Determination of GTN Model and Damage Analysis of Aluminum Alloy 6016 Sheet Metal
- Huang, Dong-Wei
- Research on the Dynamics of Red Tide Algae Density Evolution Mechanism and Control
- Huang, Fei
- The Influence of Environment Temperature on the Degradation of Lead Zirconate Titanate Ceramic
- Huang, Hong
- A Research on the Application of MTI in Motion Parameters Measurement on Human-rifle System
- Huang, Jun-Yan
- The Technology and Application of Shrink Packaging
- Huang, Jun-Yan
- Nano-TiO2/Chitosan Coated Antibacterial Paper and Its Preservation Effect in Packaging Nanguo Pear
- Huang, Qi
- The Influence of Fiber on the Resistance to Chloride-Ion Penetration of Concrete under the Environment of Carbonation
- Huang, X.H.
- Microstructure Evolution Simulation during Microextrusion at Elevated Temperature
- Huang, Yao-Qun
- Hydrothermal Preparation of High Purity of Expandable Graphite
- Huang, Yao-Qun
- Self-assembly of 3D Graphene and Its Superior Adsorption Ability for Heavy Oil
- Huang, Yong-Song
- The Research on the Microstructure and Electrical Properties of Nb2O5 Doped PBSFCZT Ceramics
- Huang, Yu-Mei
- Optimization and Models of Decalcification from Bighead Carp Scale with Citric Acid by Response Surface Method
- Huang, Yu-Mei
- Process and Models of Decalcification of Bighead Carp Scale by Hydrochloric Acid
- Huang, Zhong-Bao
- Effect of TIG Weld Current on 1Cr18Mn8Ni5N Austenitic Stainless Steel Welding Microstructure and Mechanical Properties
- Jaakson, Paul
- Development of A Smart Insole System for Gait and Performance Monitoring
- Ji, K.W.
- Grayscale Method for Emulsifying Effect Testing
- Ji, Xiao-Ting
- Modification of Regeneration Polyurethane by Blend with Ternary Nylon
- Ji, Xiao-Ting
- Effect of Nano-ZrO2 on Properties of Room Temperature Vulcanization Phenyl Silicone Rubber
- Jia, Li-Xiao
- Study on Microstructure and Properties of Surface Composition with Steel Matrix
- Jia, Pu-Rong
- Calculation on Tensile Strength of Notched 2D Woven C/SiC Composite Laminates-Considering the Nonuniformity of Material
- Jia, Xiao-Mei
- The Microwave Synthesis and Photocatalytic Activity of Sb3+-doped TiO2 Nanocomposite
- Jia, Zhi-Hong
- Effect of Process Factors on Viscosity of In-situ Particulate Reinforced Aluminum Matrix Composites
- Jian, Hai-Gen
- Inhomogeneity of Microstructure of Aluminum Alloy Welded Joint
- Jiang, Bo
- Mechanical Activated Fly Ash and Mechanism
- Jiang, Bo-Quan
- Preparations of Methylphenyldiethoxsilane by One Step Grignard Method and Methylphenylcyclosiloxane by Hydrolysis and Pyrolysis Methods
- Jiang, Bo-Quan
- Preparation of Methylphenylvinyl Raw Rubber by Bulk Polymerization and Ring-Opening Polymerization Methods
- Jiang, Bo-Quan
- Optimization and Models of Decalcification from Bighead Carp Scale with Citric Acid by Response Surface Method
- Jiang, Bo-Quan
- Process and Models of Decalcification of Bighead Carp Scale by Hydrochloric Acid
- Jiang, Le
- Experimental Research on Mechanical Properties of Fiber Reinforcement Cement Stabilized Soil
- Jiang, Li-Ying
- Effect of Flexoelectricity on the Electromechanical Coupling of Piezoelectric Nanoplates
- Jiang, Shang-Jie
- The Technology and Application of Shrink Packaging
- Jiang, Xi-Zhi
- The Determination of Negative Voltage during Magnesium Alloy Plasma Process
- Jiang, Xi-Zhi
- Synthesis and Characterization of Polysiloxane and Acrylate Elastomer Material
- Jiang, Xin-Long
- Research Advance on Accelerating Anaerobic Sludge Granulation Process
- Jiang, Xin-Long
- Antioxidant Synergistic Effect and Formulation Optimization of Several Common Natural Pigments
- Jiang, Yi-Hua
- Research Advance on Accelerating Anaerobic Sludge Granulation Process
- Jiang, Yi-Hua
- Antioxidant Synergistic Effect and Formulation Optimization of Several Common Natural Pigments
- Jiang, Zi-Bo
- Nano-TiO2/Chitosan Coated Antibacterial Paper and Its Preservation Effect in Packaging Nanguo Pear
- Jiangxiong, Li-Ren
- Influencing Factors Analysis in Simulation of Head-windscreen Laminated Glass Impacting
- Jin, Pei-Peng
- Hot Compression Deformation Behavior of the Mg-5Sn-2.5Pb Magnesium Alloy
- Jin, Pei-Peng
- Hot Compression Deformation Behavior of AE42 Magnesium Alloy
- Jin, Pei-Peng
- Deformation Mechanism of Mg-4Sn-1.5Pb Alloy
- Jin, Shao-Yue
- The Influence of Mineral Salt Interface Modifier to Pavement Rubber Concrete Strength
- Ju, Li-Rong
- Facile Synthesis and Luminescence Properties of Silica Submicron Rods
- Kang, Shao-Pu
- Influence of Heat Treatment on Hot-rolled Sheet Forming of Ti–6Al–4V Alloy
- Kang, Xiao-Yong
- A Research on the Application of MTI in Motion Parameters Measurement on Human-rifle System
- Kim, Sunnam
- Light-induced Phase Transition of Lyotropic Liquid Crystals and Motion Behavior of Micron Objects via Photochemical Azobenzene Molecules
- Kong, Li-Jun
- Influence of Copper(I) on Europium-containing Micelles
- Kong, Qiao-Ping
- Kinetics of Carboxylated Bagasse Hemicellulose Adsorption to Cd2+
- Kuai, Ji-Cai
- Model of ELID Grinding Material Removal Rate
- Kucknoor, Ashwinin
- Fluorescent Biocompatible Tactic PMMA-QDs Thin Films
- Kume, Alar
- Development of A Smart Insole System for Gait and Performance Monitoring
- Kurihara, Seiji
- Light-induced Phase Transition of Lyotropic Liquid Crystals and Motion Behavior of Micron Objects via Photochemical Azobenzene Molecules
- Kuwahara, Yutaka
- Light-induced Phase Transition of Lyotropic Liquid Crystals and Motion Behavior of Micron Objects via Photochemical Azobenzene Molecules
- Lampo, Richard
- A Sensor System to Monitor the Early-Stage Corrosion of A36 Carbon Steel
- Latif, Zahid
- Effect of Cationic UV Absorber on Light Fastness Property of Reactive Dye
- Leemets, Kaur
- Development of A Smart Insole System for Gait and Performance Monitoring
- Lei, Hao
- Low-Resistivity Indium-Tin-Oxide Transparent Conducting Films: Dependence of Carrier Electron Concentration on Tin Concentration
- Lei, Wu
- Adsorption and Precipitation of Organic Phosphonates onto the Calcite Stepped Surfaces
- Lester, Cashe
- Fluorescent Biocompatible Tactic PMMA-QDs Thin Films
- Li, C.Y.
- Reverse Reduction Ratio Effect on the Bonding Strength of 7075 Al/AZ31B Mg/7075 Al Laminated Composite Fabricated by Hot Rolling
- Li, C.Y.
- Hot Compression Behavior of Al-Zn-Mg Aluminium Alloy: Experiments and Simulations
- Li, Chao
- Study on Impact Parameter of the Hole Generatrix through a Center Hole Conical Part Cold Extrusion
- Li, Cheng
- Enhanced Sun Light Photocatalytic Activity of TiO2 Prepared with the Assistance of Urea