Proceedings of the 2015 International Conference on Material Science and Applications

724 authors
Liu, Yang
Research of Micro-alloyed Microstructure and Composition in X80 Pipeline Steel for High Heat Input Welding
Liu, Yao
The Review of Construction Technologies Using Fuzzy-Ball Workover Fluid in Well C22 and Well F20 of SZ36-1 Offshore Oilfield
Liu, Yi-Lun
Investigation of Uniaxial Asymmetric High-cycle Fatigue Failure Behavior of 7075-T651 Aluminum Alloy Sheet
Liu, Yong-Xiang
Establishing and Optimizing AFLP Amplification Reaction System of Shiraia Bambusicola
Liu, Zhao-E
The Preparation and Fluorescence of Conjugated Polymer Nanoparticles with Triphenylamine Derivatives
Liu, Zhi-Yu
Experimental Study on Pretreatment of Preparing Phosphorus Building Gypsum with Yunnan Phosphogypsum
Liu, Zuo-Yi
Establishing and Optimizing AFLP Amplification Reaction System of Shiraia Bambusicola
Long, Shao
Effect of Cationic UV Absorber on Light Fastness Property of Reactive Dye
Long, Shao
Conventional and Single-step Pretreatment Process of Cotton Woven Fabric
Long, Wen-Wu
Study on Compressive Strength and Moisture Content of Different Grades Density of Foam Concrete
Lu, Chan
The Marketing Strategies of New De-icing Robot
Lu, Guo-Zhong
Development of Novel Inorganic Antibacterial Material
Lu, Yao-Hui
Fatigue Strength Research on Aluminum Alloy Car Body for Railway Vehicle Based on Finite Element Analysis Method
Luo, Fu-Sheng
Analysis of pH Dependent Luminescence of an Europium Complex
Luo, Hong-Jie
The Manufacturing Technology of Aluminum Foam Material and Some Special Equipments
Luo, Jian-Guo
Design and Analysis of Mechanism Based on Topological Theory
Luo, Jian-Guo
Decoupling Analysis of Input Parameters of Cubic Mechanism
Lv, Yu-Guang
Determination of Mesalazine Using Terbium Rare Earth Ions as a Fluorescence Probe
Lv, Zhen
Effect of TIG Weld Current on 1Cr18Mn8Ni5N Austenitic Stainless Steel Welding Microstructure and Mechanical Properties
Ma, Hai-Liang
The Research of Low-Carbon Economy Assessment
Ma, Hai-Zhao
Simulation Research on Deep Drawing Process of Box-Shaped Parts of 2B06-O Aluminum Alloy
Ma, Hong-Kai
An Experimental Study of the Property of Phase Transition Temperature for Organic Composites Phase Change Materials
Ma, Ji-Yang
Hydrothermal Preparation of High Purity of Expandable Graphite
Ma, Lei
Study on Impact Parameter of the Hole Generatrix through a Center Hole Conical Part Cold Extrusion
Ma, Li-Xian
Study on Synthesis and Self-assemble Nano-materials of Tetra-substituted Phenoxy Nickel Phthalocyanine
Ma, Ling-Ling
Photosensitive Hyperbranched Aliphatic Polyester Based on 2,2-dihydroxymethyl Butyric Acid
Ma, Pan-Tao
The Structure and Electronic Properties of C80 Carbon Nanotube
Ma, Shao-Hui
Liaoshen Old Industrial Relocation Area Contaminated Soil Treatment Method
Ma, Su
Light-induced Phase Transition of Lyotropic Liquid Crystals and Motion Behavior of Micron Objects via Photochemical Azobenzene Molecules
Ma, Xi-Ying
The Influence of Doping Ag on Photovoltaic Characteristic of CuI Film
Ma, Yu-Xi
The Application of High Efficient Fatigue Testing Method on Engineering Machinery Steel
Ma, Zhan-Xiong
Development of Novel Inorganic Antibacterial Material
Man, Yu-Hong
Effects of Dimethyl Formamide on Laser-induced Damage to SiO2 Films Prepared by the Sol-gel Method
Man, Yu-Hong
The Micro-mechanical Property of Porous Alumina Film on Glass Substrate Prepared by Oxalic Acid Oxidation
Mao, Xin-Yu
Effect of the EM Immobilized Technology on Nitrogen Dissolution Characteristics of Aquaculture Sediment
Mcinerney, Michael
A Sensor System to Monitor the Early-Stage Corrosion of A36 Carbon Steel
Men, Shou-Qiang
Electromagnetic Simulation of Metallic Pipeline for Non-destructive Testing
Meng, Song-He
Study of Heat Flux Sensor Test Containing Metal Phase Change Heat Sink
Meng, Xin
The Review of Construction Technologies Using Fuzzy-Ball Workover Fluid in Well C22 and Well F20 of SZ36-1 Offshore Oilfield
Ngugi, Samuel
Influence of Aging Time on the Mechanical Properties and Bendability of 2A12 Aluminium Alloy
Nie, Chao-Yin
Effect of Cryogenic Treatment on Film-substrate Bonding Strength of DLC Film/High-speed Steel
Nie, Xue-Yuan
Corrosion of Permanent Mold Cast Magnesium Alloy AJ62 in Automotive Environments
Nie, Yan-Zhong
Effect of Cryogenic Treatment on Film-substrate Bonding Strength of DLC Film/High-speed Steel
Ning, Li-Hua
The Marketing Strategies of New De-icing Robot
Ogata, Tomonari
Light-induced Phase Transition of Lyotropic Liquid Crystals and Motion Behavior of Micron Objects via Photochemical Azobenzene Molecules
Ou, Ling
Inhomogeneity of Microstructure of Aluminum Alloy Welded Joint
Ouyang, Chun-Fa
Nanocomposite Reinforcement Effects in Millable Polyurethane Elastomer with Low Content of Halloysite Nanotubes
Ouyang, Chun-Fa
Modification of Regeneration Polyurethane by Blend with Ternary Nylon
Ouyang, Chun-Fa
Research on the Properties of Rigid Polyurethane Foam with Heteroaromatic Polyol
Ouyang, Chun-Fa
Effect of Nano-ZrO2 on Properties of Room Temperature Vulcanization Phenyl Silicone Rubber
Ouyang, Chun-Fa
Study on the Properties of Nano-Al2O3/Phenyl Silicone Rubber Composites
Pang, Xue-Lei
Recovery of the Rhodium( ) Octanoate Dimer by Aminopyridine-modified Resin
Pei, Lu
Organic Compounds in Paper and Plastic Food Packaging
Peng, Gui-Gui
The Influence of Environment Temperature on the Degradation of Lead Zirconate Titanate Ceramic
Peng, Liang
The Design of the Infrared Spectrally Selective Low Emissivity Coating
Peng, Wen-Jie
The Application of High Efficient Fatigue Testing Method on Engineering Machinery Steel
Qi, Xi-Wei
Preparation and Electrical Properties of (1-x)LiNbO3-xBiYbO3 Ceramics
Qi, Xiao-Li
Determination of Mesalazine Using Terbium Rare Earth Ions as a Fluorescence Probe
Qian, Kun
Lubrication Simulation and Solution of Oil Film Force and the Equilibrium Position of Three-lobe Journal Bearing
Qian, Xiao-Lin
Analysis of Influencing Factors for Sliding Wear-Fatigue Damage Interaction
Qin, Chang-Sheng
The X-ray Powder Diffraction Data for Al8GdNi4 Compound
Qin, Jian-Xiong
Classifications and Development Frameworks of Tourist Resorts Based on Geospatial Division Theory: A Case Study of Sichuan Province, Western China
Qin, Jie
Research Situation and Existing Problems of the Direction Reduction Process for Utilizing Vanadium Bearing Titano-magnetite
Qin, Jie
Mechanism and Control Study on Metallized Pellet Bonding with High Temperature
Qin, Ming
The X-ray Powder Diffraction Data for Al8GdNi4 Compound
Qin, Yuan-An
The Preparation and Fluorescence of Conjugated Polymer Nanoparticles with Triphenylamine Derivatives
Qing, Pei-Lin
The X-ray Powder Diffraction Data for Al8GdNi4 Compound
Qiu, Dian-Luan
Core/Sheath Structured PVA Micro/Nano Composite Fibers for Biomedical Applications
Qiu, Yun-Lai
Optimization Analysis on Electrical Insulation Performance of ITER Axial Composite Insulation Break
Qu, Bo
Reinforced Concrete Sewer Pipes used for Jacking Construction of Experimental Research and Finite Element Analysis
Ren, Lu
Organic Compounds in Paper and Plastic Food Packaging
Ren, Yun-Lai
Multidirectional Forging Simulation Research on a Tee Joint Valve
Rong, Hua
Study on Luminescence Properties of Blue phosphorescent Microcavity Organic Light-emitting Devices
Ruan, Guo-Xiong
The Marketing Strategies of New De-icing Robot
Ruan, Lin
An Evaporative Coolant Used to ECR Ion Source
Ryan, Jeffrey
A Sensor System to Monitor the Early-Stage Corrosion of A36 Carbon Steel
Sawada, Yutaka
Low-Resistivity Indium-Tin-Oxide Transparent Conducting Films: Dependence of Carrier Electron Concentration on Tin Concentration
Seki, Shigeyuki
Low-Resistivity Indium-Tin-Oxide Transparent Conducting Films: Dependence of Carrier Electron Concentration on Tin Concentration
Shao, Xiao-Hou
Effect of the EM Immobilized Technology on Nitrogen Dissolution Characteristics of Aquaculture Sediment
Shao, Ya-Lu
Effect of the EM Immobilized Technology on Nitrogen Dissolution Characteristics of Aquaculture Sediment
Sheng, Ye
Facile Synthesis and Luminescence Properties of Silica Submicron Rods
Shi, An-Jun
Microstructures of Surface Alloyed High Manganese Cast Steels
Shi, Chen-Ling
The Research of Low-Carbon Economy Assessment
Shi, D.W
Electrical and Magnetic Transport Properties of Pr0.1Ca0.9MnO3
Shi, Hang
Ab-initio Calculation of Structural and Magnetic Properties of Annealed Cu2MnAl Heusler Alloy
Shi, Li-Qiu
Study on Cutting Mechanism of Monocrystalline Silicon Using Molecular Dynamics on Nanometric Scale
Shi, Shi-Peng
Multidirectional Forging Simulation Research on a Tee Joint Valve
Shi, Tao-Hui
Influence of Crosswind on Aerodynamic Performance of Wind Turbine in Wind-drive Device
Shi, Xiao-Shuang
The Influence of Fiber on the Resistance to Chloride-Ion Penetration of Concrete under the Environment of Carbonation
Si, Wu-Bao
The Effect of Iron Tailing Powder on the Cement Mortar Strength
Song, Di
Determination of Mesalazine Using Terbium Rare Earth Ions as a Fluorescence Probe
Song, Jian
The Review of Construction Technologies Using Fuzzy-Ball Workover Fluid in Well C22 and Well F20 of SZ36-1 Offshore Oilfield
Song, Shuang
A Study of Preparation and Performance of the PCMs of the CA-LA Swelling Vitrified Beads
Sun, Bai-Tao
The Influence of Reinforcement Ratio to the Mechanical Behavior of Reinforced Concrete Column
Sun, Chao
Study on Impact Parameter of the Hole Generatrix through a Center Hole Conical Part Cold Extrusion
Sun, Li-Xian
Low-Resistivity Indium-Tin-Oxide Transparent Conducting Films: Dependence of Carrier Electron Concentration on Tin Concentration
Sun, Shou-Bao
Simulation Study of Phase Demodulation in Resonance Band for Gear Tooth Cracking Fault Detection
Sun, Xin
Nano-TiO2/Chitosan Coated Antibacterial Paper and Its Preservation Effect in Packaging Nanguo Pear
Sun, Zhi-Gao
An Experimental Study of the Property of Phase Transition Temperature for Organic Composites Phase Change Materials
Tamm, Tarmo
Development of A Smart Insole System for Gait and Performance Monitoring