Proceedings of the 1st International Conference on Mechanical Engineering and Material Science (MEMS 2012)
626 authors
- Juanfang, Lang
- Research of a Certain Aero Winch Test System
- Jun, Gong
- Study on the Impact of Honing Machine Reciprocating Reversing Acceleration upon Reticulate Pattern Trajectory
- Jun, WANG
- A Electric Vehicle Powertrain Simulation and Test of Driving Cycle Based on AC Electric Dynamometer Test Bench
- Jun, Zhao
- Self-Organization of PVD Cemented Carbide Tool When Cutting In718
- Jun-wei, Han
- The Application of FDS used in the Cabin Fire Simulation and Human Evacuation of Civil Aviation
- Junfa, Duan
- Combustion and Emissions Characteristics of Diesel Engine Operating on Composite Combustion Mode of DME and Diesel
- Junhao, Li
- Surface Pressure of the Mine Refuge Shelter in Underground Gas Explosion
- Junkai, Niu
- Study on the Impact of Honing Machine Reciprocating Reversing Acceleration upon Reticulate Pattern Trajectory
- Junxia, Zhang
- A Model Study of Downward Walking Slip and Fall Probability Prediction Based on Coefficient of Friction Analysis
- Junyao, GAO
- Structural Design and Motion Mechanism of the Rope-Drive Snake-Like Robot
- Kai, Tian
- Dynamic Response and Fatigue Damage Analysis for Drilling Riser
- Kai, Zhang
- Vibration Analysis of an Aero-Engine Compressor Blade
- Kai-jia, TAN
- Research on Military Simulation System based on Multi-Agent
- Kalyanasundaram, Shankar
- Dome Forming Study on Polypropylene Aluminium Laminate
- Ke-ke, ZHANG
- Research on the Design Method of Modular Structure for Satellites
- Ke-ming, ZI
- Automated Visual Inspection and its Application on Automated Inspection
- Keping, YIN
- Research on Drilling Scaling Unit Based on Virtual Prototyping
- Kun, Liu
- Finite Element Analysis on Magnetic and Mechanical Characteristics for Hybrid Magnetic Bearing
- Lan, Wang
- An Exploratory Examination of Relationship Value in Inter-enterprise Cooperation
- Lei, Pang
- Design and Realization of Virtual Training System for New Type Howitzer
- Lei, Wang
- Adaptive Sliding Mode Control Based On Offshore Doubly Fed Induction Generator for Wind Turbines
- Lei, Wang
- Fuzzy-Logic-Based Direct Torque Control Research On Permanent Magnet Synchronous Motor
- Li, Ma
- Study on Tea Saponin Extraction from Shell of Oil -tea Camellia Seeds
- Li, Shengshan
- Adaptive Sliding Mode Control Based On Offshore Doubly Fed Induction Generator for Wind Turbines
- Li, Zeng
- Analysis of 3D Magnetic Field of Magnetic Suspension Spherical Reluctance Motor
- Li, Zeng
- Mathematical Model and Simulation of Magnetic Levitation Spherical Driving Joint with Inverse System Decoupling Control
- Li-rui, Wang
- Simulation and Improvement of Vehicle Frame Using FEM
- Li-wei, Song
- Numerical Simulation of Incompressible Viscous Flow Using an Implicit Fractional Step Method on Collocated Grid
- Li-zi, QIN
- Numerical Study of Chemical Non-equilibrium Flow in Hydrocarbon Scramjet Nozzle
- Liang, Wu
- Fatigue Reliability Analysis on the Concrete Beams
- Liang-gao, Pan
- Bolt Connection Establishing Model Method and Shock Response Comparison in Diesel Fixed Assembly
- Lianhui, Shi
- Selection of the Location of Point Excitation Force of Plate Measurement Model about Decoupling Coating
- Libo, Sun
- Electromechanical Coupled Non-linear Dynamics for Micro Plate Simply supported on four Sides
- Lihua, WANG
- Orthogonal Experiments for Effect of Components on Performance Parameters of Green Sand for High Density Moulding
- Lijing, Zou
- Simulation of Machining of Incoloy 907 based on Thermodynamics
- Lijuan, Liu
- Finite Element Analysis and Optimal Design of Portable Optical Fiber SPR food Detector based on SolidWorks
- Lijun, WANG
- Flame Symptom Modelling Near Lean Blowout in a Swirl-Stabilized Gas Turbine Model Combustor
- Likun, Peng
- Improving Dynamic Performance of Stewart Platforms through Optimal Design Based on Evolutionary Multi-objective Optimization Algorithms
- Likun, Peng
- Design and Realization of Control System of a Novel Digital Hydraulic 2-DOF Motion Platform
- Lili, Chen
- Research on a Method for the Determination of Iron in Lubricating Oil
- Lili, Chen
- A Study of Moisture Content of Lubricating Oil Based on Impedance Analysis
- Lin, CHEN
- Preparation and Stress Fringe Map Change law of light Elastic-plastic Material in Deformation Object
- Lin, He
- Coupling Simulation Analysis on Support System of High-energy Storage Flywheel System
- Linsen, Song
- Temperature Field Simulation of Laser Drilling in ANSYS
- Liqing, Nie
- Inverse Kinematics for 6-DOF Manipulator by the Method of Sequential Retrieval
- Liyan, He
- The Design of high Power LED Chip Radiator
- Liyuan, Chen
- An Excitation Signal Source with Capability of Temperature-drift Suppression for Eddy Current Detection
- Lizhong, Xu
- Electromechanical Coupled Non-linear Dynamics for Micro Plate Simply supported on four Sides
- Long, Tao
- Study on Possibility of Processing TRIP Steel Sheet by Single Point Incremental Forming
- Long, Wu
- Decarburized Simulation Analysis of the Crankshaft of JB36-400 Press
- Lubo, Ge
- Electrodeposition of Ni-nanoSiO2 Composite Coating under Ultrasound Conditions
- Lulu, Yin
- Research on the Forming Process of Creative Industrial Cluster Based on the Game Model
- Lvgao, Lin
- Design of a New-style Escort Mechanism of Vertical Internal Broaching Machine
- M.M. Abdala, Antar
- Comparison of Three Different Two-equation Turbulence Models in Predicting Narrow Trench Film Cooling Effectiveness
- Manrong, Su
- The Development of the Environment Friendly Machining Center Lubricant
- Meiling, Pan
- The Morphology of Nano-MgO Particles Induced by Attapulgite
- Meiping, Lin
- Test and Optimization of ABC-System
- Meiping, Lin
- The Research of ABCM Model —Example of HZ Pharmaceutical Company
- Meiping, Lin
- An Empirical Proof for the High Accuracy of ABC
- Menglan, Duan
- Dynamic Response and Fatigue Damage Analysis for Drilling Riser
- Mengxi, Huang
- The Interior Temperature Distribution Measurement in a Rolling Tire
- Min-qiang, Xu
- Impact Analysis of the Valve to the Limition Characters of Reciprocating Compressor
- Ming, Han
- Design and Application of Multi-axis Automatic Control System Based on LabVIEW
- Ming, Wu
- Corrosion and Protection of High Strength Low Alloy Steel in Oilfield Water Injection System
- Ming-wei, Wang
- Effect of Freezing Point and Surface Roughness on Coating by Electro-spark Deposition
- Ming-wei, Wang
- Performance Study about Electro-spark Depositing DK460UF Coating on Surface of Turning Tool
- Ming-yuan, Chen
- Research on Axial Stiffness of the Double-nut Ball Screw Mechanism
- MingFei, Xia
- MTRC correction algorithm for Bistatic ISAR in presence of constant Bistatic angle
- Minghua, Chen
- The Influence of Vibration on the Performance of VDMOS Devices
- Minghui, Feng
- Design of a New-style Escort Mechanism of Vertical Internal Broaching Machine
- Mingwei, Chui
- Research on Convex Polyhedron Collision Detection Algorithm Based on Improved Particle Swarm Optimization
- Mingxin, Song
- The Influence of Vibration on the Performance of VDMOS Devices
- Mingzhu, Huang
- Study on Compound Biofilm Formation on the surface of Iron Oxide Coated Sands and Its Removal Efficiency to Ammonia-Nitrogen
- Mixiang, Qi
- The Technology Improvement on Production of the Polycrystalline Silicon by Zinc Production
- Mujian, Xia
- Numerical Simulation of Thermal Stress in Sputtered TiB2 Films by Finite Element Method
- N.A., Ahmed
- Computational Fluid Dynamics Investigation of Counterflow Ejection Effects on a Body moving with High Speed
- N.M. Elwekeel, Fifi
- Comparison of Three Different Two-equation Turbulence Models in Predicting Narrow Trench Film Cooling Effectiveness
- Na, Hu
- Preparation of Ultrafine Magnesium Hydroxide with Two Kinds of Dispersing Agent
- Na, Yin
- A Model Study of Downward Walking Slip and Fall Probability Prediction Based on Coefficient of Friction Analysis
- Nan, Chen
- Study on Active Suspension Control to Improve Vehicle Handling Stability
- Nessim, Waleed
- A Simulation Study of an Advanced Thermal Management System for Heavy Duty Diesel Engines
- Ning, Han
- Simplification Method and Application of 3D Laser Scan Point Cloud Data
- Ning, Han
- MTRC correction algorithm for Bistatic ISAR in presence of constant Bistatic angle
- Ning-jun, FAN
- Flow Field Analysis in The Domain of Work of Turbine Applied to Submunition Fuze
- PeiLin, Li
- Research on Convex Polyhedron Collision Detection Algorithm Based on Improved Particle Swarm Optimization
- Peichuan, Gao
- Air Compressor Station System Simulation
- Peichuan, Gao
- Development of Test-Control System of the Hydraulic Experiment
- Peng, Wen
- Preparation of Ultrafine Magnesium Hydroxide with Two Kinds of Dispersing Agent
- Peng, Zhang
- Design of Experimental Platform for the Optimization of Composite Prepreg Tape Lay-Up’s Parameters
- Peng-hua, Teng
- Study of Impact of Angular Velocity on Ballistic Dispersion
- Pin, Duan
- Design and Realization of Virtual Training System for New Type Howitzer
- Ping, Chen
- Derivation of the Coordinate and the Stress Components Transformation Equation in Wellbore Stability Mechanics Analysis
- Pingxin, Wang
- Test and Optimization of ABC-System
- Pingxin, Wang
- The Research of ABCM Model —Example of HZ Pharmaceutical Company
- Pingxin, Wang
- An Empirical Proof for the High Accuracy of ABC
- Pingze, ZHANG
- Design of SCADA power Distribution Monitoring System based on PLC and Configuration Software
- Qi, Guo
- Design and Realization of Virtual Training System for New Type Howitzer
- Qi, Wang
- New Online Auto Balance Device for High-speed Electric Spindle System
- Qi Bai, Huang
- Study on modes of axial flow Pump Blade based on Fluid-structure Coupling
- Qi-Feng, Gao
- Simulation Study on the Design-number of Twin Vane Spin Core Nozzle