Advances in Engineering Research

+ Advanced search
29162 articles
Proceedings Article

Implementation of R-Mart Online as a Marketing Strategy to Increase Business Revenue at R-Mart Minimarket Sungai Sahang

Dewi Irmawati Siregar, Nur Jumriatunnisah, Nurul Ilma Hasana Kunio, Friska Sagita Sinaga, Nanda Putri Septiani, Erlinda Hosiana
The rapid advancement of information technology has significantly transformed business marketing strategies. One such strategy is the use of online platforms to enhance marketing reach and increase revenue. This research focuses on the implementation of R-Mart Online, an e-commerce platform aimed at...
Proceedings Article

Research and Prospect of Foundation Pit Monitoring and Early Warning Based on CiteSpace

Xiaoguang Li, Shiji Wang, Ziwang Yu
This paper discusses the research progress in the field of deep foundation pit monitoring and early warning in China. This paper uses CiteSpace software to analyze the literature data of CNKI, and reveals the research context, hot spots and frontier trends in the field of foundation pit monitoring and...
Proceedings Article

Ergonomic Approach to Building Design Paper Shredding Machine

I Gede Oka Pujihadi, I Ketut Gde Juli Suarbawa, I Made Arsawan
Paper waste poses a significant environmental challenge due to its slow decomposition rate. While paper waste can have adverse environmental effects, recycling offers a viable solution by repurposing paper into new products. To address the issue of paper waste effectively, it is essential to focus on...
Proceedings Article

The Dynamics of Modified Leslie-Gower the Pest-Predator System with Additional Food and Fear Effect

Dian Savitri, Abadi, Manuharawati, Muhammad Jakfar
We have studied a dynamic analysis of the prey-predator model that describes the interaction between pests and predators as natural enemies. The model is considering a Modified Leslie-Gower prey-predator model with the nature of fear of the growth of pests and additional food to predator. The predation...
Proceedings Article

Research on Power Quality Analysis and Detecting System

Zhiqiang Zhao
With the extensive use of modern power electronic devices and non-linear devices, the problem of pollution of power quality is getting worse. The improvement of power quality assurance has become an important issue faced by the electricity sector. It is for this reason that power quality monitoring and...
Proceedings Article

Ecological Technology for Decreasing Agricultural Non-point Source Pollution from Drainage Ditch

Lihuan Liu, Wenping Wang, Juan Liu
Agricultural drainage is accounting for the largest to China's River Basin water pollution and agricultural non-point source pollution. The ecological function of drainage ditches is important for reducing the pollution. Through effective interception and conversion to preventing and controlling agricultural...
Proceedings Article

The Weight Analysis and Calculation about Factors of Passenger Satisfaction

Y. Liu
Firstly, the metro passenger satisfaction evaluation index system was established based on the real process of a single passenger, such as arriving, security checking, buying tickets and transiting. Secondly, the passenger travel satisfaction evaluation questionnaire was designed to conduct investigations...
Proceedings Article

Large Eddy Simulations of the Entropic Lattice Boltzmann Method

Qiang Liu, Yan Wang, Wei Xie
The large eddy simulation (LES) has not been adequately developed in the entropic lattice Boltzmann method (ELBM) framework. In particular, analysis of high Reynolds number turbulence simulations using ELBM-LES remains to be done. A standard Smagorinsky subgrid scale model in large eddy simulation based...
Proceedings Article

The Renewable Energy Development Industry Situation and its Sustainable Development Strategy in Xinjiang

Asifujiang Abudureyimu, Weiqing Wang, Qian Han
This paper analyzes the new situation faced by the renewable energy development and new trend in xinjiang, expounds the renewable energy in the position and role of the future energy system, put forward the development strategy for the future of renewable energy targets and requirements. At the same...
Proceedings Article

On the diffusion law of additional stress and bearing capacity of interbed foundation in Northern Anhui

Xiu-He Chen, Ze-Cheng Chi, Shan-Xiong Chen, Fei Yu
The shortage of foundation bearing capacity would pose damage to miniature structures on highway, threatening the security of highway. Layered foundations are widely distributed in Northern Anhui, the traditional methods of computing the bearing capacity and additional stress disagree with the situation...
Proceedings Article

Transient Performance Enhancement of PMSG-Based Wind Turbine Using Superconducting Fault Current Limiter

Lei Chen, Xin Sui, Huiwen He, Yu Lei, Fei Tang
Recently, a major part of the newly installed wind turbines are of the variable-speed type using permanent-magnet synchronous generators (PMSGs), which are required to meet grid interconnection codes for fault ride-through (FRT), so as to actively contribute to system stability during a wide range of...
Proceedings Article

Preparation and microstructure characterization of zinc coating prepared by pack cementation

Li Liu, Sirong Yu
The zinc coatings on Q235 steel substrate were prepared by pack cementation at 400 °C for different holding time. The microstructure, thickness and hardness of the coatings were investigated. The thickness and hardness of the coating increased gradually with increasing heating time. The coating was composed...
Proceedings Article

Experimental Research on Dynamic Characteristics of Primary Mirror of Vehicle Sights

Guo-quan Ren, Shou-jun Wu, Dong-wei Li
The battlefield environment, external vibration load condition is complex, in the process of vehicle and shooting, random vibration and impact load can lead to car sight structure stress and strain of the primary mirror, will affect the performance of the vehicle sights. Aimed to study the vibration...
Proceedings Article

Design of Environment Monitoring System Based on GPRS and ARM

Cui Zhao, Zhi Gong
For the problems of our country's environment monitoring system, an environment monitoring system based on GPRS and ARM techniques is designed in this paper. The monitor uses LPC2220 as its control core which is an ARM7 microcontroller, sensors collect data of SO2, temperature and humidity, and then...
Proceedings Article

A Hierarchical Neural Abstractive Summarization with Self-Attention Mechanism

WeiJun Yang, ZhiCheng Tang, XinHuai Tang
Recently, the attentional seq2seq model had made a remarkable progress on the abstractive summarization. But most of these models do not considers the relation between original sentences, which is the important feature in extractive method. In this work, we proposed a Hierarchical Neural model to address...
Proceedings Article

Compaction Property Of Integrated Backfilling Materials

Fan Xiang, Facheng Yi, Defu Du, Xuemei Zhang
Nuclear industry production would produce large amounts of nuclear waste.How to safely dispose of the nuclear waste especially high level radioactive waste (HLW) became increasingly serious problem at present. This article turned out that compaction energy was an important factor of the impact compaction...
Proceedings Article

The research and implementation of ERP-based Mobile Business Intelligence system

Zebo Zhu, BaoChuan Lin
With the development of enterprise information technology, enterprise's demands for the real-time of information and data are increasing. Along with the continuous improvement of Internet and mobile terminal technology, this paper proposes a concept called ERP-based Mobile Business Intelligence (MBI)...
Proceedings Article

Application of Taguchi and Grey Relational Analysis for Parametric Optimization of End Milling Process of ASSAB-XW 42

Nuraini Lusi, Dian Ridlo Pamuji, Anggra Fiveriati, Akmad Afandi, Galang Sandy Prayogo
The quality characteristics of surface roughness and MRR of the end mill process have been considered to be optimized simultaneously. The input parameters that are considered are cutting fluid. cutting speed. feeding speed. and depth of cut. Optimization is carried out using the experimental design of...
Proceedings Article

Performance of the Pumpkin Wind Turbine

Toto Rusianto, Saiful Huda, Angge Dhevi Warisaura, Andrean Emaputra
This paper reports existing studies on the influence of the number of blades on vertical axis wind turbine (VAWT) performance. Wind turbine blade is an important element in the conversion of wind energy to electrical energy, because of their ability to convert wind kinetic energy, even at low wind speeds....
Proceedings Article

Research Progress on Double Pulse MIG Welding in Aluminum Alloy Welding Technology

Hao Zhang, Changjun Liu, Ting Zou
Under the dual driving force of national “double carbon” strategy and lightweighting of rail transportation, aluminum alloy welding is facing the urgent demand of “high quality, low consumption and green”. Traditional laser welding is difficult to meet the stringent requirements for weld strength and...
Proceedings Article

A study of 3D Strike-Zone Design and Its Track Based on Kinect v2

Ching-Tang Hsieh, Li-Ming Chen, Ku-Chen Huang, Meng-Shiuan Pan, Hsing-Che Liou
An increasing number of researchers have begun to use depth sensors in their studies due to the drop in sensor prices in recent years. In computer vision, depth provides a wider range of useful information. In sports, baseball and softball pitchers are typically unable to self-evaluate their throw quality...
Proceedings Article

The Discussion of Cross-platform Mobile Application Development Base on Phone Gap Method

LiMei Cui
With PhoneGap method, developers can use Web technical which correspond to the W3C standard developing native mobile application. According to call the API of PhoneGap, Web applications can communicate with the SDK API of the mobile platform which using by the developers, and then, they can use the native...
Proceedings Article

A Design of Sine-wave Oscillator Based on an Improved OP-amp Differentiator

Zinan Zhou
By analyzing of typical op-amp differentiator circuit considered the op-amp amplitude-frequency characteristic, we give out a design of sine-wave oscillator based on an improved op-amp differentiator. This oscillator is not only the output sine wave harmonic distortion very low, but also easy to design...
Proceedings Article

The Discrete Numerical Models and Transient Pressure Curves of Fractured-Vuggy Units in Carbonate Reservoir

Lixin Chen, Yuewu Liu, Zhongqian Zhu, Dapeng Gao, Wen Cao, Qi Li
Fractured-vuggy carbonate reservoirs have various types of units, and making full use of the well test data to study reservoir characteristics is quit important to enhance oil production. However, conventional analytical well test model cannot consider the positional relationship of well and fractured-vuggy...
Proceedings Article

Bi2Te3 Thin Films Grown by Magnetron Sputtering

X. L. Guo, J. J. Geng, Y. H. Zhu, H. Jiang, Z. L. Wang
Bi2Te3 thin films grown the substrate with 80 nm in diameter have been prepared by using magnetron sputtering technique. The structure of thin films was determined by X-ray diffraction experiments. The average grain size and particle size in these powers were measured by the line profile analysis method...
Proceedings Article

Reliability prediction of the integrated transmission based on interval AHP and safety factor

Minggang Du, Xuan Sun, Jianguo Zhang, Juan Chen
In view of the characters that specimens of the integrated transmission are not sufficient, the failure modes are various and available data are not enough, this paper proposes a method utilizing experts’ experiences, similar products and typical design parameters to predict reliability. First, analyze...
Proceedings Article

Evaluation on Northern Sea Route Navigation Environment

Yiying Liu, Houming Fan, Xiaodan Jiang, Qiqi Zhao
Northern Sea Route is known as a new route with complex navigation environment. It will greatly shorten the distance between the Far East and Europe. This article systematically analyzes the sailing conditions of Northern Sea Route and the main factors that influence the navigation environment. An evaluation...
Proceedings Article

The relationship between iron consumption and economic development

Xiaowei Gu, Xiaohong Huang, Qing Wang, Fengbo Wang
This article focuses on the subject of iron ore. Though analyzing the relationship between iron ore consumption and economic development about China and American, it is found that the per capita consumption of iron ore in China was too early, which is not conducive to economic development. Through elaborating...
Proceedings Article

Modeling and Quadratic Stability Control of Buck Converter in DCM

Xiaojing Li, Aiguo Wu
Quadratic stability is an important performance for control systems. In this paper, the model of Buck Converter in DCM is built based on the theories of hybrid systems (HS) and switched linear systems (SLS) primarily. Then quadratic stability of SLS and two switching rules based on state feedback and...
Proceedings Article

Computer Aided Book Binding Design

Zhi-Liang Xia, Qi-Ming Tian
Books are the carrier of human civilization with the help of words, symbols and graphics to record the human thoughts and emotions which telling the historical development process of human civilization. As an important part of books, book binding plays a very important role and has the independent aesthetic...
Proceedings Article

Longitudinal Vibrations of Seismic Disturbance Vertical Bar

Kh.P. Kulterbaev, L.A. Baragunova, M.M. Shogenova, M.A. Shardanova, I.M. Abdul Salam
Longitudinal vibrations of vertical bar of harmonic and random disturbance are considered. Mathematical models of free, forced harmonic and random vibrations are described. The methods of d'Alembert, separation of variables and finite differences are used. To determine the eigenvalues of boundary value...
Proceedings Article

Function and Effects of L-cysteine on the Speciation Analysis of Mercury by High Performance Liquid Chromatography Coupled with on-line Cold Vapor Generation Atomic Fluorescence Spectrometry

Xue-Jiao Nan, Xiao-Ping Yu, Ya-Fei Guo, Tian-Long Deng
To study the function and effects of L-cysteine on the separation analysis of inorganic divalent mercury [Hg(II)], methylmercury (MeHg) and ethylmercury (EtHg), the separation, transformation and signal intensity of mercury speciation were investigated with liquid chromatography coupled on-line cold...
Proceedings Article

A Multichain Slip-Spring Model with Fluctuating Number of Entanglements Based On Single-Chain Slip-Spring Model

Teng Ma, Hui-Feng Tan, Lin Yu
We present a multichain slip-spring model with fluctuating number of entanglements for dynamics of dense polymer melts, which is based on the single chain slip-spring model by Likhtman. By introducing the exclude volume interactions, a multichain version of slip-spring model can be presented with little...
Proceedings Article

The Application of Intelligent Materials in Intelligent Product Design

Yuan Gao, Wei Xiao, Mei Gu
The products of intelligent design are rapidly growing in popularity around the world and are having increasing impact on humans' life styles. The application of intelligent materials, the basis of intelligent products in intelligent product design, is a current research hot spot. This paper, based on...
Proceedings Article

Research on Current Situation and Existing Problems of Coal Resources Development and Utilization in India

Guangqiang Wang, Zeng Li
Coal is an important pillar of energy security and sustainable economic development in India. India is rich in coal resources, the rapid growth of coal demand was led with the rapid development of its economy in recent years. On the basis of systematic analysis of characteristics of coal resources, development...
Proceedings Article

Design of a test bench to characterize mechanical phenomena involved in a bolted joint

Yongsheng Zhao, Weikai Li, Weizhe Yu
Parts of assembly are mainly fixed and connected by bolts. The performance of the assembly can be affected by the dynamic characteristics of the bolted joints. Report focuses on designing a test bench by parameter analysis and achieving the dynamic analysis of the bolted joint. In the first part, the...
Proceedings Article

Multi-objective Optimization of Turning Process Steel SKD 11 Using BPNN-Artificial Bee Colony (ABC) Method

Mazwan, M. Khoirul Effendi, Bobby O. P. Soepangkat, Satrio Darma Utama, Ridhani Anita Fajardini
In the turning process, the force is a constraint factor that must be considered because a large cutting force will generally result in a high surface roughness value. Therefore, selecting suitable parameters for the turning process is necessary to minimize surface roughness (SR), cutting force (Fc),...
Proceedings Article

Applications of Dynamic Wireless Charging for Electric Vehicles

Zhiyang Tang
With the continuous enhancement of people's awareness of environmental protection and the plight of China's lack of oil, the development of electric vehicles has become a goal in China today. At present, one of the main obstacles restricting the development of electric vehicles is the lack...
Proceedings Article

Research on the Application and Optimization of BIM Technology and Prefabricated Technology in Complex Geometric Intelligent Buildings

Xingkai Gu, Hao Zhou
BIM technology and prefabricated technology have evolved from ideal concepts to common application technologies, bringing many opportunities and challenges to the construction industry in general, and smart buildings in particular. According to the BIM model, through software technical means, to meet...
Proceedings Article

Synthesis and Characterization of Polyaniline-Carbon Nanofiber Based Ternary Nanocomposites for Supercapacitor Applications

Arna Dey, Abdul Momin, Dipannita Paul Dipa, Durjoy Sarker Tirtha, Mohammed Mastabur Rahman
Conductive polymers are promising materials due to their unique combination of electrical conductivity, lightweight nature, and mechanical flexibility. This research is focused on the synthesis of polyaniline (PANI)-carbon nanofiber (CNF) based conductive polymer and their ternary nanocomposites comprised...
Proceedings Article

Efforts to Repair Groundsill Bantar River Progo Special Region of Yogyakarta Indonesia

Yoseph Susanto, Edy Sriyono, Ilham Purnomo, Tania Bhakty
Mount Merapi is one of the most active volcanoes in the world and produces large sediments when it erupts. The Progo River is included in the Mount Merapi area, so this river will be affected by material from the eruption and has the potential to significantly change the morphology of the Progo River....
Proceedings Article

Electrical Properties and Photo-response of FETs based on Few-layer WS2 Nanoflakes

Hang Yang, Shi-Qiao Qin, Fei Wang, Jin-Yue Fang, Xue-Ao Zhang
The photo-electrical properties of few-layer WS2 nanoflakes, fabricated by mechanical exfoliation, were systematically studied in this paper. The few-layer WS2 FETs are n-type and possess a high gate modulation (On/Off ratio is larger than 104) and a relatively high carrier mobility ( ). The photo-electrical...
Proceedings Article

Key Parameter identification of quad-rotor aircraft system based on CIFER Algorithm

Hao-ran Qi, Xiao-hui Qi
Currently,there are some limitations of twxisting ways of obtaining the key parameter of quad-rotor aircrafts—mechanism analysis method and experimental method,that the first one is not adapt to varied environment and need a large amount of computation,the second one especially refers to wind tunnel...
Proceedings Article

Preparation and in Vitro Dissolution of Curcumin Tablets

Yuanping Wang, Chuqin Yu, Zhixiang Gan, Zhongbo Xie
Objectives: To prepare curcumin tablets, and evaluate their in vitro dissolution. Methods: Curcumin was dissolved in acetone, wet-granulation and tableting. The amount of Poloxamer 188 and Gremophor RH40 were chosen as factors, and the in vitro dissolution at 120 min was used as evaluation index. The...
Proceedings Article

Study on the dispersion degree of chopped carbon fibers dispersed in fluid medium by microscopic analysis

Xuanyu Wang, Zhilong Liu
In order to study the dispersion effect of chopped carbon fibers in fluid medium, an experiment was designed to disperse carbon fibers by explosion in the air while another was by ultrasonic waves in mixed solvent of ethanol and acetone. A characterizing method has been set up based on the number of...
Proceedings Article

Error Analysis of the Cable Force on Skew Normal Distribution

Lin Shen, Laijun Liu, Fangwen Wu, Yu Li
In order to investigate the the mathematical model considering the skewness-parameter, which covers the shortage of long-span bridge in sensitive parameter analyzing. Random variable along with its statistic probability model is taken. The application of influence coefficient helps to build up a determining...
Proceedings Article

The Research on Fault Diagnosis for Gas Recovery of Single Coal Bed Methane well Based on Improved Particle Swarm Optimizing Support Vector Machine

Yu Miao, Jianhua Yang, Wei Lu
As a new type of energy, coal-bed gas plays an important role in the national resource structure. This paper introduce the principle and process of gas recovery of single coal-bed methane well, according to the analysis of faults occurred in the system of gas recovery of single coal-bed methane well,...
Proceedings Article

Application of Role-based Access Control Model in High-level Athletes Management System

Yijun Li
Aimed at that there are large numbers of users visiting high-level athletes’ management system, the control model of traditional access can’t fully meet the weaknesses of these requirements, proposing the idea of multi-rights management based on ARBAC02 model and establishing a new rights management...
Proceedings Article

Development Strategies of Urban-rural Planning Management under New Situation

Xu Fang, Ma Yong
In this paper, the new requirements for urban-rural planning management proposed in the Third Plenary Session of Eighteen have been discussed. It is advised that it is necessary to focus on the public interest, strengthen the supervision, improve the administrative transparency, improve the government...
Proceedings Article

Monolithic Pyroelectric Infrared Sensor Array with Porous SiO2 Film

Xiang-Yu Sun, Wen-Bo Luo, Xin-Qiang Pan, Xiao-Yuan Bai, Jia Meng, Yao Shuai, Chuan-Gui Wu
A simple method to fabricate pyroelectric sensors array using standard semiconductor process on Silicon substrate was investigated. 600 nm porous SiO2 film was prepared by spin coating, working as ultra-thin thermal insulator. Good insulation property was achieved owing to its extremely low thermal conductance....
Proceedings Article

Integration Techniques of Ecological Restoration and Mining in Open Pit Coal Mine

Ziling Song, Dongyang Zhao, Yuxiang Zhou, Junfu Fu, Yushi Ji
The ecological environment problems in open pit mining and the present situation of coal mining are analyzed. The traditional open pit mining aims at pursuing economic interests, which leads to serious ecological environment problems. Open pit mining will cause the comprehensive destruction of the solid...
Proceedings Article

Scaled Model Tests on the Influence of Reinforcement Spacing on the Deformation of Reinforced Retaining Wall

Di WU, Jianjian WU, Qian LI
Reinforced earth retaining wall is a kind of retaining wall which can bear lateral pressure of soil, which is made up of fill, stressed geosynthetics and retaining blocks. It can enhance the strength and stability of soil with the interaction between the reinforced material and the soil by arranging...
Proceedings Article

Aspects Related Self-Control Function Of Computer Aided Management Control Systems

J.L. Csapo, C. Brisan
Companies operating in geographically dispersed locations require a management control system that allows global access to information, related the performance of different units, allowing all level of management to follow up and intervene when is necessary. Expansion of business to isolated areas with...
Proceedings Article

Study on Dynamic Mechanical Properties and Microstructure of Epoxy Asphalt

Zhe Dong, Li-Ping Li
The morphology and dynamic mechanical properties of epoxy modified asphalt(EMB) were studied using dynamic mechanical analyzer (DMA) and fluorescent microscopy (FM). DMA results showed that dynamic modulus and storage modulus reached a maximum value when 5 wt % epoxy resins were added. However, the dynamic...
Proceedings Article

Mathematical model of dust collection process in apparatus with counter-swirling flows in aspiration systems

I.V. Stefanenko, T.V. Solovyova, V.N. Azarov, T.A. Kislenko, A. M. Redhwan
The article substantiates the importance of environmental safety and labor protection in industrial enterprises; special attention is paid to the content of fine dust. The problems of trapping fine dust particles in a centrifugal field with the help of vortex dust collectors of CSF are considered. To...
Proceedings Article

Quantization and Analysis of Toll Plaza Based on Probability Distributions and Queuing Theory

Feng Zhang
The toll station, served as the bond to highways, has always been the bottleneck to the capacity of the highway. Based on probability distributions and queuing theory, the thesis builds the quantitative model of capacity and calculates two evaluation indicators to analyze the drawbacks of the traditional...
Proceedings Article

Modulation Performance of Blue Ingan Light-Emitting Diodes with P-Type Electron-Blocking Layer and N-Type Hole-Blocking Layer

Guichu Chen, Zhaoxiong Zhao
We have fabricated two blue light-emitting diodes (LEDs) samples with p-type electron-blocking Layer and n-type hole-blocking Layer for the modulation speed measurement. The experimental results show HBL can improve the modulation speed better for blue LED. The energy bands and recombination rates of...
Proceedings Article

Research on Information Security Internal Control Mechanism of Intelligent Electric Grid

Feng Gao, Long Qin, Ying Yang, Fangfang Dang
As the foundation of intelligent electric grid safe and stable operation, information security involves every node of electric information systems which are difficult to manage and have a large number of users. It is important that how to promote the level of information security internal control. This...
Proceedings Article

Analysis of Coil Misalignment in MCRWPT System

Junfeng Yang, Xiaodong Zhang, Dandan Liu
Coil misalignment often takes place in wireless power transfer (WPT) systems. It may result in decrease of transfer efficiency and system instability. In this paper the mutual inductance model and the circuit equation of Magnetic Coupling Resonant WPT (MCRWPT) are established firstly. And the influence...
Proceedings Article

Design and Simulation of a Three-Phase Grid-Connected Fast-Charging System for NIMH EV Batteries Using a CC-CV Protocol

Didi Istardi, Afif Nuril Musthofa, Robi Kurniawan, Jihan Zeinyuta Rosafira
This paper presents the design and simulation of a three-phase grid-connected fast-charging system for a 12 V, 75 Ah Nickel-Metal Hydride (NiMH) electric vehicle (EV) battery using MATLAB/Simulink. The proposed system integrates a three-phase active rectifier, a DC-link filter, and a buck–boost DC-DC...
Proceedings Article

To improve tree support and the trash

Ge Zhang
This paper proposes a new simple tree with a fixed stent makes the transplant more safe and beautiful trees. The paper in order to put forward a new type of garbage can., mainly due to the improper waste disposal and litter bins filled leak, causing environmental pollution and cigarette butts caused...
Proceedings Article

Analysis of microbial populations in River-lake ecotone of Poyang Lake

Xiaolan Huang, Jian Zhang, Ting Zhang, Baoqing Hu
Using the independent -cultivated molecular biology method, By Next-generation DNA sequencing techniques , Gene sequences of microbial groups for water samples collected from River-lake ecotone of Poyang Lake. water samples were collected form River-lake ecotone of Poyang Lake to determine gene sequences...
Proceedings Article

Research on the Thermophysical Properties of Wall Materials of Dai nationality Dwelling

Liping Li, Shuai Fan
In this paper, taking the Dai-nationality dwellings of different materials in JingHong in Xishuaibanna as a research object, field tests for the thermophysical properties of wall materials in the sunmmer were carried out, that have tested the temperature of wall-surface and indoor temperature, and contrast...
Proceedings Article

A Mixed Normalization Capacitance Model for Electrical Capacitance Tomography

Lifeng Zhang, Feng Zhu, Qin Zhang
Electrical capacitance tomography (ECT) is a technique developed in recent 30 years, which aims to measure multi-phase flow. The image reconstruction for ECT is an inverse problem to find the permittivity distribution in a pipe. The normalized capacitance measurements are needed during the process of...
Proceedings Article

MTF Estimation Based on an Improved Step edge Method

Mengya Qu, Yongsheng Zhang, Weican Meng
A higher precision reconstruction method for MTF, not constrained by the slant edge angle, is proposed. The improved method adopts new techniques of gradient operator and moving window in ESP sample refinement to gain more accurate and robust MTF estimated results. Experiments show that the new method...
Proceedings Article

Analysis on the Physical Performance of PP/MMWPE/EPDM Monofilament Modified by Blending

Jiangao Shi, Wenwen Yu, Wenzhu Zhong, Yongli Liu, Lei Wang
PP/MMWPE/EPDM monofilament was prepared by blending modify and its physical performance and the cost was studied. The results showed that the breaking strength of PP/MMWPE/EPDM monofilament was 16.8% higher than that of PE monofilament while its knot strength loss rate is 3.8% higher than that of PE...
Proceedings Article

A Two Stage Optimal Strategy for Centralized Charging Stations Planning in High Voltage Distribution System

Ning Xiong, Jie Wang, Wenguang Zhu, Shiyuan Zhong, Min Wang, Wei Tang
Charging and discharging control of centralized charging station becomes more important in power system operation. In order to achieve a load shifting and wind power stabilizing, this paper presents a two-stage optimal scheduling model for centralized charging stations based on the considerations of...
Proceedings Article

Finite Element Simulation of Strain Localization on a Shear Band of Structural Soil

Hong-Ru LI, Yuan ZHONG, Hua-Pen ZHAO, Sheng-Hong AI
Based on the theory of breakage mechanics, the structural soil are conceptualized as binary-medium model consisting of bonding brick and frictional band. Shear band is structural soils’ breakage, localization band sprout and development is dynamic process that bonding brick is translating into frictional...
Proceedings Article

Security and Privacy Protection of Smart Home Based on IPv6

Zhenyu Liu, Qinglei Cao, Yang Pan, Gui Chen
At home and abroad, smart home, after more than ten years development is getting more and more widely welcomed. Smart home technology is developing rapidly, and with the emergence of IPv6, smart home based on IPv6 is becoming a trend. Meanwhile, security and privacy protection of smart home is receiving...
Proceedings Article

Yaojia-Nenjiang Formation Hydrocarbon Accumulation Characteristics in Songliao Basin, Northeastern China

Chao Wang
The reservoir of Late Cretaceous Yaojia-Nengjiang Formation in Songliao Basin was a large-scale delta complex formed in the transgression and regression period, which had the characteristics of sand body in distributary channel, mouth bar and sheet sand. The sand bodies extended to the lacustrine center...
Proceedings Article

China Clean Energy Development direction

HongXia Shi, Fuli Liu, Shen Wei
At present the development of clean energy and sustainable development have become the main stream source of the world nowadays due to facing the serious global crisis of resources and environment. Investigation of energy situation and occurred problems of China and some typical countries, such as America...
Proceedings Article

Review of Application Research of BRBs in Seismic

Xiaoli Li
As a new type of energy dissipation component buckling restrained brace overcomes traditional brace s drawbacks such as compression buckling inability to make full use of material s plastic hysteretic energy dissipation function when under pressure. Buckling restrained brace also has the advantage of...
Proceedings Article

Valve spool and valve sleeve annular gap value simulation analysis and optimization in hydraulic rotary self servo valve

Xiaolei Liu, Lin Jiang, Qi Hu, Ruolin Wu, Yanhui Xiang
The internal flow field model of valve spool and valve sleeve annular gap was established. The model was called oil film. The fluid motion state space was laminar flow by calculating of Reynolds number. The formulas about resistance torque and leakage of the valve spool and the valve sleeve annular gap...
Proceedings Article

Characteristics and index system construction of airport ecological community

Haohao Dong, Liangcai Cai, Zhi Wang, Bin Shao
Airport ecological community is a prospective subject of environmental protection, and is the development direction of airport building. But there is no universal set of formal evaluation system for airport ecological community. From the connotation of airport ecological community, this paper discusses...
Proceedings Article

Elastoplastic Analysis of Casing Stress in Thermal Recovery

Shimin Dong, Jie Yang
On the basis of the main thermal recovery wells casing damage characteristics, the temperature rise of the casing-cement is clearly defined by the simulation analysis of thermal recovery wells wellbore temperature field at the end of steam injection. Based on the theory of thick wall cylinder in the...
Proceedings Article

Adsorption of Acid Orange II and Cu(II) Ion with Amino-EDTA Modified Silica Gel

Hanyi Chen, Zhijun Xu, Yunfeng Huang, Zhichao Lin, Yanbo Zhang, Qiang Wang
Silica gel was modified with N-[3-(Trimethoxysilyl)propyl]ethylenediamine, following grafted with ethylenediaminetetraacetic acid (EDTA). The functionalized silica gel was used to readily absorb Cu(II) ion from aqueous solution forming SG-Cu, via the coordination of EDTA group on the surface of silica...
Proceedings Article

A DFA-Based Wood Frame Furniture Design Using Quality Function Deployment: A Case Study in School Open Spaces

Chi Ouyang, Kuei-Yang Wu
With more and more schools expanding and redesigning their landscape spaces, therefore their outdoor furniture’s shape, dimension, quality and usage are also changing and redesigning. One of the significant changes in the design process is to take users’ needs/concerns into account. This change is influenced...
Proceedings Article

Scientificity and Reasonability of Hospital Construction

Jinguo Wang, Na Wang
Diseases, patients and society are closely integrated together. The role of evolution of infectious disease is associated with the design of hospital building, because of the extension characteristics of the diseases from an individual to the public in and outside the hospital building. This paper analyzes...
Proceedings Article

Assembly Sequence Planning Based on Discrete Bat Algorithm

Yuejun Chen, Li Zhang, Wenjie Han
A Discrete Bat Algorithm (DBA) is proposed to solve the assembly sequence planning (ASP) problem. Several key technologies including the position and velocity of Bat Algorithm, corresponding operators for updating the position and the position of local search are redefined. The fitness function is established...
Proceedings Article

Studying the Carbon-Dioxide-Driven Freezing of Turkey Meat

Evgeny Nikolayevich Neverov, Yevgeniy Nikolayevich Neverov, Igor Alekseyevich Korotky, Yelena Valerievna Korotkaya, Aleksandr Nikolayevich Rasschepkin
In recent years for refrigerated processing of poultry, development and introduction of different apparatuses operating on the principle of the direct contract with carbon dioxide have been conducted. The disadvantages of the used contact apparatuses operating using carbon dioxide are: relatively low...
Proceedings Article

Analysis of The Solution to The 0.5% of Global Sulfur Limits of Ships by 2020

Yanhong Zhao, Yang Xu, Lijiao Zhou, Xingmin Zhao, Yaning Wang
For the international maritime organization (IMO) has decided to implement 0.5% of global sulfur restrictions by 2020,the paper focuses on three main countermeasures,advice on the relationship between the advantages and disadvantages of the three countermeasures shall be given.It is hoped that the plan...
Proceedings Article

On the connections between multigranulation rough sets and generalized rough sets

Jiao Yang, Shiming Wan, Keyun Qin
This note makes a comparative study of multigranulation rough set model and generalized rough set model. It is pointed out that the pessimistic multigranulation rough set model (PMGRS) is a kind of generalized rough set model, it is induced by a reflexive and symmetric relation on the universe. On the...
Proceedings Article

Study Of DC Railway Traction Substation On Rectifier Loading Variations

Andri Pradipta, Santi Triwijaya, Rizal Andreansyah, Sunardi Sunardi
This research focuses on studying harmonic disturbance conditions that have the potential to arise at DC traction substations caused by non-linear loads, namely rectifiers. In the DC railway traction substation system there is a rectifier component whose function is to convert AC power to DC. The aim...
Proceedings Article

Thermal Performance Analysis of a Shell and Tube Condenser in Steam Power Plant

Herlin Sumarna, Septiani Wulandari, Tri Lestari
Steam power plant is one of plant of electricity needs that has great potential in energy supply and is an alternative to electricity needs in Indonesia. This study reviews the thermal performance of a steam power plant’s condenser, focusing on its exergy efficiency and heat transfer rate over five different...
Proceedings Article

Progress on Vision-Based Mobile Robot Target-Tracking Systems

Hua Chen
With the rapid advancement of mobile robotics, vision-based target tracking has shown great potential in intelligent warehousing, service robotics, and autonomous driving. As a key technology for autonomous navigation and environmental interaction, target tracking plays a crucial role in enhancing the...
Proceedings Article

Structural Optimization and Strength Analysis of Aircraft Optical Pods

Yuxin Bo
Aircraft optical pods, the core of aviation optoelectronic systems, must maintain ≤ 0.1mrad optical axis stability under -40 ℃ ~80 ℃ temperature alternation, 10-2000Hz vibration, and 3-5g overload. Traditional aluminum structures suffer 0.2-0.5mm thermal deformation, while existing studies neglect the...
Proceedings Article

Study and Monitoring of Distributed Generation

Zhiqiang Zhao
With gradually increasing scarcity of traditional energy sources and electricity load, distributed power being environmentally friendly, efficient, with flexible features has attracted wide attention. Development of distributed power generation technology and the establishment of new power grid containing...
Proceedings Article

Investigation of a Linear Optical Fiber Sensing and Monitoring System

Jian Chen, Wei Li Bai
In this paper, monitoring software based on principle and structure of distributed optical fiber fire detection used to observe the temperature of the cable laying and realize the real-time alarm is designed. It was written in Qt Programming language with cooperation of optimization design of the signal...
Proceedings Article

Research on Provincial Energy Rebound Effect in China

Ying Han, Jie-Li Zhai, Jian-Hua Shi
In view of the negligence of unbalanced development between regions in current research on the energy rebound effect in China, we provide a calculation method based on stochastic frontier production function. By using China's provincial panel data from 1977 to 2014, this paper estimates energy rebound...
Proceedings Article

A Data Preprocessing Method for Food Detection Data Warehouse

Ying Han, Chunlong Yao, Qiuyan Xin, Xiaoqiang Yu, Xu Li
The food detection data plays an extremely important and indispensable role in the evaluation of food quality. However, there are a number of detection items based on different evaluation standards for a product. The detection items can be divided into four categories: optimum index, negative index,...
Proceedings Article

Configuration and Evaluation on Gas-fueled Distributed Energy System Used in hotel Building

Zhao Lei
In this paper, characteristics of distributed energy system powered by gas turbine and gas-fueled internal combustion engine are analyzed. System configuration scheme was designed based on meteorological condition, internal load demand and time of equipment utilization. Compared with conventional energy...
Proceedings Article

The research on rainwater power generation system

Zhicheng Huang
The potential energy of rain has certain potential in power generation. This article used the technology of cross flow rainwater power generation. In order to achieve the highest efficiency of rainwater power generation, this paper established a reasonable distribution model of generator in pipeline...
Proceedings Article

Enhanced Electromechanical Performance of Graphene Oxide-Nafion Nanocomposite Actuator

Wei Chang, Huiqin Lian, Yanou Hu, Yueting Li, Benzhe Wu, Yupeng Liu, Junlin Ma, Junwei Ma, Jierui Wang
This topic involves graphene Nafion composite. Graphene is prepared by using hummer’s method, thus the functional graphene. The functional Graphene-nafion composite has excellent electrical conductivity, thermal conductivity and mechanical properties. Therefore, it can be used as the preparation of high-strength...
Proceedings Article

Application of Improved Template Matching Algorithm in Target Image Detection

Guoquan Ren, Wentao Jiang, Dongwei Li, Guozhang Li
In view of the disadvantage of the current method for target detection that poor efficiency and poor real-time, a novel method of target detection based on digital image processing technology was proposed. The traditional normalized correlation template matching algorithm was improved via setting optimal...
Proceedings Article

Approach for operation and expansion of quarries prone for blast vibration issues

H.S. Venkatesh, G. Gopinath
Ground vibration resulting from blasting, has become a critical environmental issue with the increasing mining activities in areas close to human settlements and many a times the locals resist the blasting even though it is not causing damage to their structures. In general, apprehensions or perceptions...
Proceedings Article

Nonlinear dynamic coupling analysis on gear system of automated mechanical transmission

Qiang Song, Ping-yang Sui
In the process of the automated mechanical transmission operating,one pair of cogwheels are engaged with the other idling.Because both gear pairs are supported on one shaft,the states of them will be mutual coupling.By analyzing the meshing stiffness,mesh damp,support stiffness and coupling state via...
Proceedings Article

Moving capability of mechanism based on topological graph theory

Jian-Guo Luo, Mao-Yan He
Based on the analysis of current developing state of graph theory, define the description of spacial moving capability of common couples and translation base and rotation base of mechanism, based on the new description method in topological graph theory. DOF(degree of freedom) of hybrid mechanism analyzed...
Proceedings Article

THE ROLE OF TERMINAL 3 ULTIMATE SOEKARNO HATTA INTERNATIONAL AIRPORT IN SUPPORTING INDONESIA TOURISM DEVELOPMENT

Anita Mega Mahardani, Yasmin Nurjanah
Technology has evolved, especially in the field of air transportation. The dynamic of air transportation technology have seen through the competitions between airports all around the world, when the airports strive to serve as many passengers as possible and provide modern infrastructure along with the...
Proceedings Article

Finite Element Analysis of Surcharge Preloading on Soft Ground Using Equivalent-load Method

Binbin Xu
The surcharge preloading method is reproduced numerically in this paper. The plastic vertical drain is simulated using the drainage surface and the embankment is represented by equivalent load. The results show that the settlement and the pore pressure are correct, which can be used for the future engineering.
Proceedings Article

Growth Responses of Apical Shoots Rootstock Rubber with Retardants Application and Effect on Grafting Success

Sarman Sarman, Zainal Ridho Djafar, Yakup Parto, Heru Suryaningtyas
This research aimed to study the effect of retardants concentration on the inhibition of apical shoots of rubber rootstock and analyze the relationship between the apical bud dormancy and grafting success relating to the influence of retardants. The study was conducted in the Teaching and Research Farm...