Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
1459 authors
- Huang, Wei
- Design of Wireless Monitor System Based on ZigBee Technology
- Huang, Xuemei
- The research on die structure of aluminum alloy bars for preventing the coarse grain
- Huang, Y.H.
- The Oil Recovery Mechanism of Activated Indigenous Microorganisms by Nutrient Agents
- Huang, Yan-Yan
- Structure-switching hairpin probe based electrochemical aptasensor for highly sensitive detection of protein
- Huang, Yi
- Strcture and Infrared Optical Properties Research on Fe-Doped CuAlO2 Semiconductor
- Huang, Yibing
- Effect of Exogenous 24-Epibrassinolide on Salt Resistance of watermelon (Citrullus lanatus L.) under Salinity Stress
- Huang, Yingsheng
- THE EXPERIMENT ABOUT RECOVERABLE ANCHOR CABLE IN THE FOUNDATION PIT SUPPORT
- Huang, Yunguang
- Research on Rapid Analysis for Purity of SF6 via Ion Mobility Spectrometry
- Huo, Dongxing
- Analysis of Metallurgical Raw Materials and Environmental Protection
- Huo, Dongxing
- Application Analysis of Dry Dust Removal Technology
- Ji, Changfa
- Experimental research on heat transfer characteristics of Dimple plate heat exchanger
- Ji, Jun
- Experimental Study of Magnetic Fluid and Magnetic grease combination rotary Sealing
- Ji, S.
- Effect of coal moisture on denitration efficiency and boiler economy
- Ji, Shuo
- Study on Heat Exchange of convection heating surface of a Pressurized Oxygen Enriched Coal-fired Boiler
- Ji, Xixian
- Mechanism analysis and protective measures of anti-salt corrosion in concrete
- Ji, Zh. G.
- Extracting tin from simulated leaching solution of anode slime with cyclone electrowinning method
- Jia, Huamin
- Research on Combinatorial Approach in Composition-structure-property of Non-metallic Materials
- Jia, Jia
- Application of DSP motion controller in welding robot of oil tank
- Jia, Lijie
- Series form solution for a graded composite strip with elastic variation in span direction
- Jia, Linyan
- Preparation of Red-emitting Europium( ) doped SrAl2B2O7 Phosphors and Investigation of Luminescent Properties
- Jian, Haigen
- Anisotropy of fracture toughness of 2124 aluminum alloy plates
- Jiang, Baoshi
- Optimization of concrete design mixing artificial pozzolan based on orthogonal test
- Jiang, Dai-Xiang
- Study on the influence of Paint-removal Process on the performance of the used parts for remanufacturing
- Jiang, E.S.
- Characterizations of nickel oxide thin films prepared by reactive radio frequency magnetron sputtering
- Jiang, Hongchun
- A Discrete Firefly Algorithm for Routing Optimization of Milk-Run
- Jiang, Huaizhong
- Application of Shield in Subway construction
- Jiang, Huiyu
- Robot global path planning based on improved ant colony algorithm
- Jiang, J.X.
- Enzymatic hydrolysis of steam-exploded sugarcane bagasse by adding natural Sapindus peel
- Jiang, L.Q
- Study of New Welding Tubular Joint Used For Jacket
- Jiang, Li
- Study on Progressive Collapse Mechanism of RC Structures
- Jiang, Maofa
- Effect of trace magnesium addition on the characteristics of mechanical properties in high strength low alloy steel
- Jiang, Q.
- Dielectric properties of Mn-doped BaTiO3-based ceramics synthesized by wet chemical method
- Jiang, Qiao
- The experimental study on shear behavior of concrete I-shaped beam with web openings
- Jiang, S.
- Effect on Marine Life by Noise of Offshore Wind Farm
- Jiang, Shi-Yu
- Determination of Four Metal Elements in Chicken Feed by Microwave Digestion-HR-CS FAAS
- Jiang, Suqin
- Study on Laser Surface Microtexture Processing and Friction of 45 Steel
- Jiang, Xianbang
- Thin HfSiN Films prepared by Magnetron Sputtering
- Jiang, Yang
- The relationship between the air void system and frost-salt resistance of concrete
- Jiang, Yi
- Study on Relation between and Design
- Jiang, Zhen-Yang
- NFC Tag Reading and Writing Application Based on Unity3D
- Jiang, Zheng
- The Hardware Design of Power Quality Online Monitoring Device Based on MCU
- Jiang, Zhenyang
- Research on Cost Estimation of Auto Parts Based on PLM
- Jiao, E.L.
- Influence of carbon and alternating oxic-anoxic model on sludge bulking and pollutant removal effect
- Jiao, E.L.
- Shortcut nitrification-denitrification can be attributed to the operation pattern of intermittent aeration profile
- Jiao, Guihai
- Numerical Simulation and Analysis of Multi-Heat Source Stirling En-gine Combustion Chamber
- Jiao, Guihai
- Thermal Analysis of Methanol Reforming Proton Exchange Membrane Fuel Cell System
- Jiao, Liyong
- Preparation of Copper / Polyaniline Nanocomposite
- Jiao, Yuqin
- Principle and Application of Ball Transmission Mechanism
- Jiao, Yuqin
- Simulation Method of Hydraulic Confined Piston Engine
- Jiao, Yuqin
- Study of fiber laser welding for DP980 high strength steel
- Jie, Xiaohua
- Study of Polyacrylic Acid Dispersing Pb-Sn-CNTs Composite Plating Solution
- Jin, Dongdong
- Guiding Disassembly Sequence Planning Based on Improved Fruit Fly Optimization Algorithm
- Jin, Guangya
- Numerical Simulation Study on Flow Characteristics of Supercritical Carbon Dioxide in a New Cleaning Chamber
- Jin, Hezhu
- The Study of Cross Blowing to Eliminate the Slag of Bulk Amorphous Alloy During Laser Cutting
- Jin, Jie
- Study on microstructure and high-temperature tribological properties of multi-component nitride hard coatings
- Jin, Jing
- Space Hierarchical Design of Mobile User Interface Based on Eye Movement Experiment
- Jin, X.
- Study on radiation power density effects on flight performance
- Jin, Xin
- Synthesis, Characterization and Gas Separation Properties of Polyimides Containing Fluorene Units
- Jin, Xin
- Synthesis and Gas Separation Properties of Intrinsic Microporosity Polymer PIM-1
- Jin, Xin
- A Study on the Controlling Method of the Statically Indeterminate Bridge’s Additional Internal Force Caused by the Temperature Action
- Jin, Yuran
- Development Type Selection of 3D Printing Base: Model Analysis and Empirical Study
- Jing, Changyong
- Electrochemical DBS Wastewater Treatment Research
- Ju, Lincang
- Coordinated Control Object Modeling Based on Improved Particle Swarm Optimization Algorithm
- Ju, Lincang
- Application of Fuzzy PID in Coordinated Control Object of Supercritical Unit
- Ju, Ran
- Design and Realization of the Automatic Gear Machining System
- Kan, J.W.
- Design and Test of a PZT Wind Generator Excited by Rotary Magnet
- Kan, Lianbao
- Study on the Flocculation of Oilfield Wastewater by Microwave
- Kang, Chaoyi
- Experimental study on mechanical properties of FRP components and comparison of steel properties
- Kang, Q.
- Study on blasting vibration reduction technology by digital detonator
- Kang, Qingge
- Research on Design Method of Structure Parameters of Parallel Robot Driven by Double Sliders Linear Motor
- Kang, Zhangyi
- Large Deformation Analysis for Flexure Hinged Displacement Amplifier based on Minimum Potential Energy
- Ke, S.R.
- Feasibility of Cladding Ti to Carbon Steel by Diffusion Bonding Followed by Hot-rolling
- Kong, Longguang
- The Hardware Design of Power Quality Online Monitoring Device Based on MCU
- Le, J.J.
- The Oil Recovery Mechanism of Activated Indigenous Microorganisms by Nutrient Agents
- Lei, Feng-Jie
- Extracting Faint Signals Behind Bright Sources From CLASH Imaging Using Fourier Analysis
- Lei, Hanmin
- Catalytic Properties of Cu Complexes in Oxidative Carbonylation of Methanol
- Lei, Niu
- Applying the Linear Neural Network to TCP Congestion Control
- Lei, Xuanhua
- A Photo-electricity Target for Testing Photoelectricity Trackers
- Lei, Yuqing
- The Application of PID Controller in Missile Longitudinal Loop System and Its Simulation
- Li, A.F.
- Interface shear strength between slender bamboo rod and ruin soils with high plasticity
- Li, Beizhi
- Influence and optimization criterion of milling modes and process parameters on residual stress
- Li, Bin
- The Establishment and Verification of 90° Elbow Pipe with Circular Cross Section Internal Pressure Distribution Model
- Li, Bo
- Preparation of Copper / Polyaniline Nanocomposite
- Li, Bokui
- Study on Laser Surface Microtexture Processing and Friction of 45 Steel
- Li, C.C.
- Dielectric properties of Mn-doped BaTiO3-based ceramics synthesized by wet chemical method
- Li, Chao
- Determination of Four Metal Elements in Chicken Feed by Microwave Digestion-HR-CS FAAS
- Li, Chaochao
- Comparative study of SPWM and SVPWM modulation algorithm based on dual Fourier integral theory for high performance current source converter
- Li, Chunmei
- A Nonlinear System Control Strategy Based on Single Chip Computer
- Li, Cunhe
- Evaluation System of Heating Quality
- Li, Ding-Peng
- Extracting Faint Signals Behind Bright Sources From CLASH Imaging Using Fourier Analysis
- Li, Donghui
- Research of Resource Model for Mobile-Learning Based on Cloud Computer
- Li, Duanneng
- The Study of Cross Blowing to Eliminate the Slag of Bulk Amorphous Alloy During Laser Cutting
- Li, Duanneng
- Study on the determination of elastic modulus of amorphous alloy by the acoustic method
- Li, F.
- Effect of ferrous on the adsorption of As(V) from aqueous solution on activated carbons
- Li, Fang
- Study on the Flocculation of Oilfield Wastewater by Microwave
- Li, Fei
- The propagation and accumulation of dimensional shrinkage in investment casting
- Li, Guanglei
- Measures to improve system stability of island microgrid
- Li, Guanglei
- Research on grid connection control strategy for island microgrid with renewable energy resources
- Li, Gui-Xiang
- Heavy Metal Contents and Accumulation Characteristic of Dominant Plants in Tin Mining Wasteland of Gejiu city,Yunnan,China
- Li, Guifu
- Development of Antibacterial and Thermal Storage Carbon/Silver Fabric by Using Thermoprint and Fitting Technique