Proceedings of the 2016 International Conference on Engineering and Technology Innovations
[WITHDRAWN]Network Intrusion Detection System and Its Cognitive Ability based on Artificial Immune Model
Xuepeng Huang, Jianhui Lin
With the rapid development of science and information technology, computer and network technology have made jumping progress, which not only speeds up the global information, but also brings more serious information security issues. Information network security has become a new term, which is related...
Research on Mechanical properties of Micro-aro Oxidation Ceramic Coatings on Magnesium
Cheng Gao, Yiqun Zhou, Jianmin Hao, Jinyong Xu
The paper, to explore mechanical properties of magnesium alloy and ceramic coatings by micro-arc oxidation, through measurement of tensile modulus of elasticity of magnesium alloy matrix, three-point bending method to measure the elastic modulus of the ceramic coatings. The results show that: can get...
Study on the giant magnetostrictive actuator control strategy based on genetic algorithm setting the PID parameter
Dengyuan Mo, Qidou Zhou, Shaochun Ding, Zhiyong Xie
In This paper, the relevant research is carried out about seabed sound reflection . It has influences on the test results of the real-boat test based on the acoustic holographic technology. The effects of seabed reflection on underwater acoustic test is analyzed, through simulating sound field of free...
The Research of Welding Robot off-line Programming System
Jing Li, Jun Li, Wei Dong Hao
In the applied process of robot off-line programming technology, it is necessary for the model to solve the correction problem which is between the practical working and off-line simulational environment. Robot coordinate system calibration method is proposed by measuring workpiece coordinate system...
ESP Network Curriculum Design Based on Constructivism
Ming Wang, Dachao Yuan
Computer and Internet technology have been widely applied in the elementary stage of English study in Chinese universities. However, how to exploit the advantages to promote ESP course teaching reform remains to be discussed. This paper aims at the major issues existing in ESP curriculum teaching and...
Industrial network integration development and upgrading model based on industry 4.0
The new round of industrial revolution featured with industry 4.0 is the important opportunity of industrial development. Under the new normal state, driven from the factors and investment to the intensive development under the driving of innovation, combining with the new trend of new industrial revolution...
Research on Establishing System of Integrity for National and State Examination
In recent years, there is a public concern over integrity of state examinations in China. In fact, the efficient operation of examinations is built on faith and integrity. Nowadays, the main reason for anomie of national examinations is the alienation of the main purpose of the examination, lack of severe...
Adopting Open Innovation Strategy to Empower SMEs in Developing Countries
Hailekiros Sibhato Gebremichael, Renyong Hou, Qian Sun
Recently open innovation practice in SMEs has received an extensive attention in the scientific research, management and government. Nonetheless, most previous studies were contextualized to firm's capabilities and quality of the external knowledge infrastructures from the advanced countries. Studies...
Object Model Research Based on Data-Driven
GuoFei Zhang, Xiang Du, Lu Wang
The paper presents a kind of OOA/OOD method about management information system (MIS). The object model includes information model,function model and status model, named IFS model in this paper. These models are controlled by some data. Model Driven Development(MDD) is a kind of model driven, which is...
Research on the Integrated Construction Technology of Granite Ground Crystallization
Shan Zhu, Xiaoxu Meng, Haiping Wang, Lengjing Liu
Granite ground construction quality is directly related to the quality and the grade of the building, which also has great impact on the building. This paper aiming at the quality problems easily occurred in the granite floor construction, putting forward 4 essential integrated technology, namely CAD...
Study about the Effect of Sericin Finishing on the Performance of Sportswear
The influence of sericin finishing on the air permeability, antistatic, uvioresistant, and hygroscopic and sweat releasing of the sportswear sold in the market after sericin finishing. The conclusion drawn from the research is that the antistatic property, uvioresistant property and hygroscopic and sweat...
A Research on Kyphoplasty Instrument of Memory Alloy Wire Netting Ball
Purpose of research: developing a kyphoplasty instrument of memory alloy wire netting ball and discussing the possible treatment of osteoporotic vertebral compression fracture. Method: The application of Ni-Ti alloy hyperelastic wire netting ball, the application of the equipment which can stretch and...
Rain-Wind-Induced Vibration of Cable Computed by Ansys
Ling Lv, Lei Zhao, Fang Zhu, Longfan Peng
Stay cable is one of the main components of cable stayed bridge to bear loads. Due to its large flexibility, small quality and small damping, various of harmful vibrations could happen easily under the external excitations. Rain-wind-induced vibration is the strongest form of vibrations. Under the joint...
Research of Urban Lake Ring landscape planning and design--Case Study of Niushan Lake Tech-Eco City
Urban Lake is an important part of urban aqueous environment, which provides not only recreation for residents, but also high ecological service value as an ecosystem. Along with the increasing urbanization of our country and accelerating development and utilization of urban lake resource, sustainable...
Research on Dimension Adjustment Method of Variant Design
Boqi Hou, Xuemei Li, Ke Wang
In order to study the problem of the dimension of the dimension of the model modified design. A geometric model for the layout of dimension dimension. Through the containment relationship between the dimensions of the relationship between the size of the resulting constraint relationship, on the basis...
Impact of different synthesis methods on the electrocatalytic activity and stability of Pd-Fe/C nanoparticles for oxygen reduction reaction in fuel Cells
Esubalew Meku, Chunyu Du, Yajing Wang, Lei Du
The rational synthesis of active, durable and low cost catalysts has of particular interest for fuel cell applications. The structural properties of fuel cell catalysts can be modulated by different synthesis methods, which significantly influence the oxygen reduction reaction at the cathode. In this...
An Improved Block Stitching Method based on Bidimensional Empirical Mode Decomposition
Chun Wu, Wenbo Wang
The bidimensional empirical mode decomposition based on block partitioning(BBEMD) by using of radial basis function interpolation reduces the computational cost, but the blocking artefact is noticeable in the resulting mode. For alleviating the blocking artefact problem, we proposed a modified BBEMD....
Pharmaceutical Engineering Design based on professional design competition and comprehensive project
Zhenhua Chen, Yuyu Xu, Leilei Zhou, Ying Yin
Objective: To improve the capabilities of solving practical engineering problems for Pharmaceutical engineers. Methods: All subjects were divided into two groups, and in the experimental group, elements of professional design competition and plant design with preparation technology, equipment, GMP and...
Numerical simulation analysis of chloride ion penetration under marine environment
Ling Lv, Qundi Liu, Wen Sun, Zhenxing Wang
The article gives a more effective and reasonable method for prevention of concrete structure corrosion considering both structure safety and economy by milling the core of the reinforced concrete structure and doing the silver nitrate titration experiment under marine environment . The results shows...
Feasibility analysis on radiant transient heat flux meter calibration system
Chunchen Sheng, Peng Hu, Xiaofang Cheng
A heat flux meter calibration system composed of a vacuum cryogenic container, a blackbody furnace and a set of T-type thermocouples measurement system is introduced in this paper. Primary purpose of this system is to calibrate specific heat flux meters applied in spacecraft thermal ground tests within...
Analysis of 3D Formation Pressure Based on Logging Data
Yanan Sheng, Zhichuan Guan, Kai Wei, Yuqiang Xu
A method for constructing regional 3D formation pressure based on logging data was established in this paper. It aims to deal with the problem that constructing regional 3D formation pressure in the block which is short of the seismic data or has poor quality of seismic data. To begin with, logging data...
Venture capital investment performance: Based on innovation perspective of multi-factor effect
Yan Jiang, Ye Xu
China's capital market is booming in recent years. Large numbers of starting-up companies are showing up, which attracts both domestic and foreign venture capital firms. This paper investigates the impact of venture capital investment on the impact of portfolio companies. The innovation and significance...
Decomposition of carbon emissions from industrial energy activities in China
Zhonglin Sheng, Weida He, Yufei Xin
Energy system is the largest source of carbon emissions in a country or region. Since China's economic increases rapidly these years, it also brings the growth of energy consumption and carbon emissions. This paper indicates an index decomposition analysis to evaluate the carbon emissions from industrial...
Identification of active ingredient of codonopsis cordifolioidea by n-butyl alcohol
Yunpeng Luan, Shuangqing Zheng, Yanmei Li, Qiming Wang
Current Codonopsis cordifolioidea products are mostly its crude extract, which is of low technology content and low added value, and studies on the active ingredients of Codonopsis cordifolioidea are very limited. To promote industrial development of Codonopsis cordifolioidea product and to increase...
Analysis and research of micro learning environment based on mobile network
Being increasingly common in our lives, mobile networks have created a mobile, convenient, and individualized environment for microlearning. This transformation has caused change in the format of learning resources made available through micro-courses and MOOC (Massive Open Online Courses) so that they...
The AAC Application on Communication for Children with Autism
This paper studies the effect on the Augmentative and Alternative Communication (AAC) System for communication ability of autistic children. Procedures and Methods: Selecting five autistic children as research subjects, and the single subject experimental method was used to train subjects with the AAC...
Remanufacturing scheme decision model and application based on reliability evaluation
Qin Xiang, Hua Zhang
With the elimination rate of mechanical products is getting higher and higher, it has become a huge problem for manufacturing enterprises to resourcefully dispose the used mechanical products. In order to optimize the resource utilization of the used components, a decision-making model for determining...
Small digital recognition in gravel aggregate production scenario
Ling Li, Kai Liu, Fei Cheng, Long Li
The production process of aggregate industrial is monitored by the identification of the digital. In the video, the digital character whose size is less than 12 15(The width of the digital image is 12 pixels, and the height is 15 pixels.) is defined as the small digital. The recognition effect is evaluated...
A Polymorphic Ant Colony Algorithm (PACA) for the Selection of Optimized Band Selection of Hyperspectral Remote Sensing Image
Xiaohui Ding, Shuqing Zhang, Huapeng Li
With the definite labeled samples, it is difficult that avoid the curse of the dimensionality for the accurate and efficient classification of hyperspectral images. It is necessary that reduce the dimensionality of hyperspectral images. Therefore, Polymorphic Ant Colony Algorithm (PACA) based band selection...
Study on Dynamic and Non-destructive Ultrasonic Echo Detection Method of Plant Stem Water Content
Danju Lyu, Xinling Shi, Xia Wang, Yi Dong
Stem water content is an important index of plant water balance. A new method based on changes in ultrasonic properties of stem was used to monitor stem water content in this paper, because the propagation of ultrasonic pulse echo signal and its attenuation characteristics in the material are closely...
A New Method of Tracking Motion Human Based on Multiple Pyroelectric Sensors
Hui Zeng, Xueming Hu, Nan Zhang, Ji Xiong
Pyroelectric infrared (PIR) sensor is low-cost, low-power small component commonly used only to trigger alarm in presence of humans or moving objects. PIR sensors are widely used as a simple, but reliable. In this paper, we present a novel pyroelectric sensor node, feature extraction method and human...
Enzyme properties and thermal stability of horseradish peroxidase (HRP-DL)
Te Wang, Jing Tian, Tingting Li, Jian Li
Horseradish peroxidase (HRP) is widely used in biological engineering, wastewater treatment, enzyme-linked immunosorbent assay and other fields. It is great significance to study its enzyme properties, stress resistance and protective agent. In order to provide good quality HRP, and protection method...
Research and application on innovative technologies for digital construction of network floor
Junyi Shao, Yanlei Song, Xuemei Cao, Di Wu
With the rapid development of new technologies and new building materials,new network floor as a type of new building materials has been widely used in ground projects, owing to its wiring flexible, simple and practical, easy maintenance, and environmental friendly features. However, there are problems...
Risk assessment and prediction of heavy metal pollution in sediment of Biliuhe reservoir
Jian Zhao, Hongbo Zheng, Wenjia Zhou
The Biliuhe reservoir, which is one of the most important water sources in Dalian, is the "source of life" of Dalian. To explore the characteristics of heavy metal pollution in Biliuhe reservoir, the potential ecological risk of these heavy metal elements were evaluated by two methods, i.e. geo-accumulation...
The development of Innovation team leader leadership behavior scale
Qiang Wu, Jigan Wang, Chuanhao Fan, Hong Gao
On the base of connotative definition and theoretical basis, the initial measurement project of develop Innovation team leader leadership behavior scale refer to scales of scholars both at home and abroad, use the combination of quantitative and qualitative methods to select measurement project. The...
Seasonal variations of terrestrial Dissolved Organic Carbon loading in response to rainfall events
Huijiao Qiao, Jian Xu, Jilin Yan
Dissolved organic carbon (DOC) loading from lands to rivers in response to rainfall events are the major carbon sources to aquatic ecosystem. We used high-resolution measurements to determine the runoff exports of DOC from the Chippewa River and watershed which was largely dominated by agricultural land-uses....
Determination of the Volatile Constituents in Banana Flowers and Bracts by Headspace Solid-Phase Microextraction and Gas Chromatography - Mass Spectrometry
Yuanmin Wang, Xiangpei Wang, Feng Xu, Hongmei Wu
The volatile constituents in banana flowers and banana bracts were analyzed by gas chromatography-mass spectrometry, coupled with headspace solid-phase microextraction. A quantitative analysis in percent was performed by peak area normalization measurements. 31 compounds were identified in banana flowers...
Livestock-Product Nitrogen-Footprint: a Fresh Method to Assess the Sustainability of Livestock Breeding
Saijun Zhou, Mingjun Deng, Wenbing Luo
Nitrogen-footprint is a new method developed in recent years to measure the impact of reactive nitrogen produced by human activities on the environment. Livestock-product nitrogen-footprint, which is based on life cycle assessment theory (LCA) and nitrogen footprint, is used to define and measure the...
The effect of multi parameter changes of arch bridge on buckling analysis of arch bridge
Huang Lin, Tongfa Deng, Qiang Zheng, Rui Liao
Based on the data of a arch bridge that lready built up, the finite element analysis model is established by finite element analysis software called Midas Civil. The buckling mode and buckling characteristics of the bridge are analyzed. The following operations changes are performed: the width of the...
Empirical research on food industrial security of China
Wei-da He, Chuan Zhang
The paper studies the industrial chain and the food security of China. It constructs an index system for estimating the food security of China during the period of 2006-2015. The empirical result indicates that during that time the condition of China's food industry develops from basic security to insecurity....
The solitary waves of nonlinear Dirac equation in complex systems
We adopt suitable numerical method to study the solitary waves of nonlinear Dirac equation in complex system. In some conditions, using nonlinear Dirac equation, we can better describe the macroscopic electrical phenomena and features generated by large amounts of electrons. As a result, we found the...
Finite Element Analysis on Seismic Behavior of Embedded Self-Centering Rocking Wall Structure
Peiyuan Qin, Hanheng Wu, Aizhen Wu
This paper designed a new structure in order to reduce the seismic damage to buildings. In this paper, basic elements, connection methods and structure relations of the self-centering rocking wall structure were introduced. A series of characteristics, such as high prefabrication degree, replaceable...
Application of Finite Element Method in Large-span Beam Bridge
Wenxia Ding, Qinghua Guo
In the analysis of large structures, usually finite element model according to the blueprint, the finite element model thus created often fail to reflect the true state of the actual structure. It is necessary to establish the finite element model is corrected. Typically, finite element model updating...
Cable-stayed bridges chatter performance analysis
With the development of transport, compared with ordinary cable-stayed bridge cable-stayed bridge because of its convenience, appearance, economical characteristics of the construction, in the construction of roads, bridges in the city has been rapid application, but because of the structural rigidity...
Application of Image Processing Technology Refined in The Medical Imaging
Medical Imaging contains extremely rich information about the internal body of a patient in clinical diagnosis, new technology research and medical treatment, medical education and training as well as for the treatment of patients having an increasingly important role. Based on the medical imaging target...
Research on Surface Fatigue Crack Image Recognition Detection Method Based on Computer Vision Technology
Xuepeng Huang, Xiaohui Chen
This paper goes through computer vision technology in the application of image acquisition and processing to solve the surface fatigue crack image recognition detection problem. At the same times, this paper studies machine vision technology (AVI) in the surface fatigue crack detection method, its method...
Effects of seabed reflection on the accuracy of acoustic holography test analysis
Dengyuan Mo, Qidou Zhou, Shaochun Ding, Xiaojun Lve
In this paper, the relevant research work is carried out about seabed sound reflection. It has influences on the test results of a real-boat test based on the acoustic holographic technology. The effects of seabed reflection on underwater acoustic test is analyzed, through simulating sound field of free...
Research on vehicle monitoring system
Lun-bin Li, Hai-kun Teng, Li-hong Wang
The vehicle monitoring system is to use GPS technology to locate the vehicle, the vehicle information through the communication network back to the monitoring center, monitoring center and then use GIS technology to analyse the vehicle information, the vehicle is displayed on the electronic map, and...
Kombucha Culture and Component Analysis
A traditional tea drink acidic Fermentation broth contains a variety of nutritional factors, including tea some nutrients, live microbial cells and their metabolites. Kombucha bacteria containing mainly acetic acid bacteria, yeast, lactic acid bacteria and other cells. This paper trained to do Kombucha...
Design of AP Network Subsystem Based on WLAN System
Zhuoran Yang, Yanmei Zhang
In recent years, the rapid development of wireless communication technology, especially with wireless LAN technology is widely used in notebook computers, smart phones and tablet PCs and other Wi-Fi terminal equipment, more and more families, institutions and enterprises began to use a WLAN large-scale...
Research on Analysis and Visualization of The DataTransformation Interface Based on Logging While Drilling(LWD)
Peng Wang, Yanmei Zhang, Hongwei Chen
In order to solve the problem that the different format data collected from sites are transferred among computer systems, the project finished the modularization for reading the data file brought from field acquisition and the drawing of image and curve, which will be exported to the specified file in...
Research on Wear-resisting of Copper-Indium-infiltration on 304 Stainless Steel by Double Glow Plasma Technology
Jinyong Xu, Yin Wang, Yan Tang, Yan Wang
Copper indium element is penetrated into the surface of 304 stainless steel by double glow plasma alloying technology. The microstructure of the sample was analysed by means of SEM and EDS. The friction performance test of the samples is carried out with the wear testing machine, and the relevant parameters...
Study on infiltration of Copper-Indium Alloys and Corrosion Resistance of 304 Stainless Steel by Double Glow Technology
Jinyong Xu, Yiguang Wang, Jianmin Hao, Yan Tang
Copper-Indium alloys elements were metallized into 304 Stainless Steel surface by Double Glow Plasma Surface Alloying Technology (Double Glow Technology). Microstructure and Corrosion Resistance of diffusion layer analyzer was analysed by scanning electron microscopy, energy spectrum and electrochemical...