Proceedings of the International Conference on Communication and Signal Processing 2016 (ICCASP 2016)

316 authors
Ahuja, G.
Automatic Classification of M-FISH Human Chromosome Images using Fuzzy Classifier and Statistical Classifier Images using Fuzzy Classifier and Statistical Classifier
Akojwar, S.
Performance Evaluation of Algorithm for Detection of Fades in Video Sequences in Presence of motion and Illumination
Akojwar, S.
Optimization of BPNN parameters using PSO for EEG signals
Akojwar, S.
Effective Algorithm for Detection of Wipes in Presence of Motion and Illumination
Aphale, S.
Analysis of Various Adder Circuits for Low Power Consumption and Minimum Propagation Delay
Areda, Getu
Finite Element Modeling and Simulation of Electromagnetic Crimping of Al6016-T6 Tube with Steel Rod
Arya, R.
Performance Analysis of DES Algorithm and RSA Algorithm with Audio Steganography
Awale, R.
Techniques of EMG signal analysis and classification of neuromuscular diseases
Awale, R.
Wavelet Packet Sub-band Based Classification of Alcoholic and Controlled State EEG Signals
Babar, R.
Advanced Software Defined Radios for Wireless Communication with Improved Power Efficiency
Bagoriya, Todarmal
Experimental Study of Anode Shape Prediction in Through Mask Electrochemical Micro Machining
Baheti, B.
Automatic Classification of M-FISH Human Chromosome Images using Fuzzy Classifier and Statistical Classifier Images using Fuzzy Classifier and Statistical Classifier
Baid, U.
Comparative Study of K-means, Gaussian Mixture Model, Fuzzy C-means algorithms for Brain Tumor Segmentation
Baisane, Vaishali
Investigations into Wire Electro-discharge Machining of A6061/Al2O3p Composites
Banait, Shruti
Microscopic Analysis of Heat Affected Zone (HAZ) of Submerged Arc Welding (saw) Joint for 1018 Mild Steel Sheet
Bano, N.
An Integral Treatment For Coupled Heat and Mass Transfer By Natural Convection From A Radiating Paraboloid In A Porous Medium
Bansod, S.
Detection and Localization of Anomalies from Videos based on Optical flow Magnitude and Direction
Bansode, Raj
Shielded Metal Arc Welding Electrode Selection Using Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) Method
Banwaskar, M.
Performance Analysis of Shot Change Detection Methods
Bapat, C.
Human Skin Detection Using RGB, HSV and YCbCr Color Models
Bauskar, Nikhil
FEA Based Simulation and Experimental Analysis of Forces in Dry Milling of Inconel 718
Bhagat, Madhuri
Study of Zr and Sn Doping on Photoluminescence Property of Cadmium Sulphide Nanoparticles
Bhagat, M.
Wireless Transfer of Solar Power for Charging Mobile Devices in a Vehicle
Bhakhar, P.
Directivity Enhancement of Miniaturized Directional Coupler using Defected Ground Structure
Bhalchandra, P.
Fuzzy Based Intelligent System to Predict Most Suitable Crop
Bhandare, Smita
Flow Controlled Chemical Machining
Bhatkar, Omkar
Residual Stress Analysis in Orthogonal Cutting of AISI 1020 Steel
Bhide, G.
Dual Band High Gain Union Shaped Micro-strip Patch Antenna
Bhirud, Tejas
Experimentation and Optimization of Shrinkage in Plastic Injection Molded GPPS Part
Biradar, T.
Wideband High-Gain Directly Coupled Circularly Polarized Mi-crostrip Patch Antenna with Shorting Pin
Birajdar, G.
Full Reference Image Quality Assessment of Perceptual Distortion based on Image Retargeting
Bishwash, Himanshu
Design and Material Optimisation of a Solar Dryer – Tray Section
Bobadi, Shreya
Design and Material Optimisation of a Solar Dryer – Tray Section
Boda, M.
Analysis of Solar Dryer using Tono Therm M-65 Phase Change Material
Bormane, D.
Stabilization of Jittery Videos Using Feature Point Matching Technique
Brahmaknakr, Prakash
Experimental Investigations into Powder-Mixed Electrical Discharge Machining (PMEDM) of HCHCr D2 Die Steel
Brahmankar, P.
Optimization of Process Parameters of Nickel – Chromium Electroplating for Thickness Variation using Genetic Algorithm
Brahmankar, Prakash
Investigations into Wire Electro-discharge Machining of A6061/Al2O3p Composites
Brahmankar, P.
Some Investigations into the Electrical Discharge Machining of Inconel 718 Alloy using Copper and Brass Electrodes
Chanmanwar, Rahul
Analysis of Micro-texture Geometrical Deviations in Wet Chemical Machining
Chavan, Vishwanath
Some Experimental Investigations on Turning of Nimonic 80A using Sialon Ceramic Inserts
Chavan, S.
Performance Evaluation of Algorithm for Detection of Fades in Video Sequences in Presence of motion and Illumination
Chavan, S.
Effective Algorithm for Detection of Wipes in Presence of Motion and Illumination
Chavan, S.
Multimodality Medical Image Fusion using Rotated Wavelet Transform
Chavan, Y.
A Two-dimensional Analytical Model and Simulation for Dual Material Gate Junctionless Transistor
Chikhale, D.
Recent Trends in Millimeter Wave Communication
Choudhari, P.
Developement of Classification Indices for Diseases using Photo Plethysmography
Chowdhary, G.
Study of Different Burst Scheduling Algorithms Using FDLs as QoS in Wavelength Division Multiplexing OBS Networks
Dabade, Uday
Optimization of High Pressure Coolant Assisted Turning of Inconel 718 using TOPSIS
Dabade, B.
Abrasive Assisted Electrical Discharge machining: An innovative hybrid approach
Das, Sanat
Exploring Machinability of AISI 4340 Steel with Coated Carbide Inserts
Das, Santanu
Exploring Machinability of AISI 4340 Steel with Coated Carbide Inserts
Dawari, B.
Study of Interfacial Pressure Distribution for Preloaded Bolted Connection
Deosarkar, S.
Recent Trends in Millimeter Wave Communication
Desai, Sandeep
Influence of Manufacturing Parameters on Performance of Biodegradable Mg-Ca1.0 Implant
Desai, Harshvardhan
Application of Shainin DoE tool to Explore Unknown Variables causing 'Ghost Noise' in 5th Gear Cycle of Transaxles during NVH Testing
Deshmukh, Nilaj
Simulation and Experimental Study of Acoustic Waves for Cleaning of Soot in Process Equipments
Deshmukh, M.
High volume red mud composites for development of value added products in concrete industry
Deshpande, H.
Integrated CMOS 3D Microstrip Patch Antenna Prototype for Wireless Energy Harvesting
Deshpande, H.
Pomegranate Fruit Diseases Identification and Grading
Dhakad, Leena
Analysis for Machining of Ti6Al4V Alloy using Coated and Non-Coated Carbide Tools
Dhanvijay, M.
Distortion Reduction Strategies for PCD Runout of Cam Shaft Gear
Dhende, Shahaji
Microscopic Analysis of Heat Affected Zone (HAZ) of Submerged Arc Welding (saw) Joint for 1018 Mild Steel Sheet
Dongre, Ganesh
Analysis for Machining of Ti6Al4V Alloy using Coated and Non-Coated Carbide Tools
Dudhane, A.
Interstitial Lung Disease Classification Using Feed Forward Neural Networks
Dugad, Rupesh
Chemical Machining of Monel
Dugad, Rupesh
Flow Controlled Chemical Machining
Dwivedi, V.
Directivity Enhancement of Miniaturized Directional Coupler using Defected Ground Structure
Fadewar, H.
Fuzzy Based Intelligent System to Predict Most Suitable Crop
Fakir, K.
Analysis of Various Adder Circuits for Low Power Consumption and Minimum Propagation Delay
Farakate, Sachin
Chemical Machining of Monel
Gaigole, P.
Analysis for Machining of Ti6Al4V Alloy using Coated and Non-Coated Carbide Tools
Gaikwad, D.
Pomegranate Fruit Diseases Identification and Grading
Gaikwad, M.
Advanced Software Defined Radios for Wireless Communication with Improved Power Efficiency
Gambhir, A.
Performance Analysis of DES Algorithm and RSA Algorithm with Audio Steganography
Gandhi, Sarvadnya
Analysis of Micro-texture Geometrical Deviations in Wet Chemical Machining
Gangurde, Sanjaykumar
Shielded Metal Arc Welding Electrode Selection Using Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) Method
Gavade, J.
Passive Approach for Copy-Move Forgery Detection for Digital Image
Gayathri, P.
A New Parallel Algorithm for EREW PRAM Matrix Multiplication
Geetha, K.
A New Parallel Algorithm for EREW PRAM Matrix Multiplication
Geetha, K.
Discrete Controlled Pulse Width Modulated Interleaved Boost Converter using Bilinear Transformation technique
George, P.
Experimental Investigation and Optimization of Flatness and Surface Roughness using Grey Relational Analysis for WCB Material during Face Milling Operation
Ghelot, Dilip
Experimental Study of Anode Shape Prediction in Through Mask Electrochemical Micro Machining
Ghole, Pooja
Automated CAD Modelling of Mechanical Components
Ghonge, P.
Drop-size analysis using 2D Double Density Dual Tree Discrete Wavelet Transform
Ghonge, P.
Drop Size Distribution of Rain Droplet Using Non-Subsampled Contourlet Transform and Double Density Dual tree Transform
Gogte, C.
Optimization of Process Parameters of Nickel – Chromium Electroplating for Thickness Variation using Genetic Algorithm
Gogte, C.
Mechanical Characterization of Hardness and Surface Roughness for Cryo Treated 7075 Aluminium Alloy
Gohil, Jigarkumar
Actuation of Electro-Pneumatic System using MATLAB Simulink and Arduino Controller- A case of a Mechatronics systems Lab
Goilkar, Shashikant
Design and Development of a Variable Damping Device for Vibration Control with Electrorheological (ER) Fluid
Gosavi, V.
Optimization of Process Parameters of Nickel – Chromium Electroplating for Thickness Variation using Genetic Algorithm
Guled, C.
MHD Flow Over a Stretching Permeable Surface Using Homotopy Analysis Method
Gupta, T.
FEA Based Simulation and Experimental Analysis of Forces in Dry Milling of Inconel 718
Gurav, Sham
Numerical Investigation on Effect of Wrinkle on Stiffness in Isotropic Metal Sheets
Halder, S.
Keypad/Bluetooth/GSM Based Digital Door Lock Security System
Harname, P.
Keypad/Bluetooth/GSM Based Digital Door Lock Security System
Harshe, Rahul
Numerical Investigation on Effect of Wrinkle on Stiffness in Isotropic Metal Sheets
Ingle, R.
Techniques of EMG signal analysis and classification of neuromuscular diseases
Ingle, R.
Wavelet Packet Sub-band Based Classification of Alcoholic and Controlled State EEG Signals
Iyer, B.
Characterisation of Concurrent Multiband RF Transceiver for WLAN Applications